Operating Instructions - Home-tek Light n Easy HT851 Instruction Manual

IMPORTANT
Electrical requirements:
Please ensure that the voltage shown on the rating plate of your appliance corresponds with your
household electricity supply which must be AC (Alternating Current).
Appliances are supplied with a fitted plug.
If the electrical sockets in your home are not suitable for the plug fitted to this appliance, the plug
should be removed and an appropriate one fitted.
Note: Any plug removed from the mains lead, if severed, must be destroyed, as a plug with a
bared flexible cord is hazardous if engaged into a live socket outlet.
Features
Your Handy Mop Steam Cleaner is a really versatile home appliance that, if used correctly, will
make cleaning easier, quicker and more efficient.
• Unique pumping system providing 2 different actions to produce steam.
• Can be used both vertically and horizontally.
• The product is supplied with 4 standard pads.
• High temperature steam can be used to loosen and remove hardened food, chewing gum,
grease, mildew, soap scum, dirt and grime in all areas of your home without the use of
chemicals.
• Sanitizes to reduce germs, bacteria, mould, dust mites and mildew
Main Components
1. Water Tank
1
2. Water Tank Cap
3. Main Housing
2
4. Handle
5. Steam Trigger
6. Power Indicator LED
7. Base Plate
8. Steam Exit Nozzle
9. Grippers
3
10. Cleaning Pad
11. Filler Cup
7
6
The Cleaning Pads (10) are held in position on the
Base Plate (7) with gripping strips on the reverse
side of the pad, align these with the grippers (9) on
the Base Plate and press to hold.
4
10
7
5
9
9
10
4

Operating Instructions

Filling the Water Tank
IMPORTANT: Never put anything in the water tank except distilled or cold tap water. Clean-
ing detergents or any other spirit-based liquid may be dangerous, could damage the appli-
ance and will invalidate the warranty.
Use distilled water in hard water areas to prevent lime scale building up, and prolong the life
of the appliance.
Warning: Always unplug the appliance from the electrical outlet before filling. Never attempt to fill
the unit under a tap, always use the Filler Cup (11) provided
Hold the unit vertically and remove the Water Tank
Cap (2) by pulling the top and allowing it to hinge
freely.
Add water using the Filler Cup (11). Do not overfill.
Replace the Water Tank Cap by pushing gently up-
wards until it clicks to lock in place.
Using Your Handy Mop
For your convenience the handy Mop has a unique
pumping system that produces steam two ways:
1. By pressing the Steam Trigger
2. Horizontal movement of the Base Plate.
11
• Attach the Cleaning Pad (10) to the Base Plate
(7) as described on page 4.
Caution: Always unplug the appliance before
adding or removing the Cleaning Pad.
• Plug the unit into an electrical outlet. The Power
Indicator LED (6) will now illuminate.
8
• Allow approximately 30-60 seconds for the unit
to reach its operating temperature.
• The Handy Mop is now ready to use.
Note: On initial use some water will come out of
the Steam Exit Nozzle (8). This is normal.
• To produce steam, press the Steam Trigger (5).
Initially this may require 6-10 rapid presses
7 before steam exits the Nozzle.
• Once steam is produced, it will continue with
the natural vertical or horizontal movement of
the Handy Mop, this is achieved by applying
light pressure to the surface and maintaining
constant movement. If more steam is required
the Steam Trigger can be pressed at any time, by
pressing intermittently you will note a rhythm for
maintaining a continuous flow of steam without
any water leaking or dripping.
11
2
Filling the Water Tank
2 ways to generate steam
Use the Steam Mop to clean
tiles, shower screens and trays
and ceramic floor tiles
5