Password - Rohde & Schwarz Topex MobiLink IP User Manual

MobiLink IP
To avoid this, follow the rules carefully:
- don't turn off the MobiLinkIP equipment or the computer while the firmware is being overwritten;
remember the equipment does not work while firmware update is in progress;
-
- after successful updating, verify the upgraded firmware;
remember that updating the firmware on the MobiLinkIP could cause some or all of the
-
configuration settings to be lost, depending on the degree of change in the firmware.
Therefore it is highly recommended to save the current configuration before updating, and then
restore it. To backup the settings, perform a Save, update the firmware, and then load the saved
settings, after having the equipment operating with the updated firmware.
6.10.5

Password

Allows the modification of passwords for the log-in accounts, in this case "admin".
First of all, use the "Account" drop list to choose for which account do
you want to change the password, for user (who has access only to
the SMS page) or for admin, the Administrator account.
For changing the "admin" account password, the user must be logged in as admin.
Type the new password and enter it again on the second row to confirm it.
"Save" saves the new password.
Replace the default passwords for user (99user11) and respectively Administrator (99admin11)
with specific (of your own) as soon as possible.
Please choose a password with a minimum of six characters. In order to effectively prevent
unauthorized access, the password must be long enough and include both letters and numbers.
Note that the password is case-sensitive.
MobilinkIP_Usermanual-sw1.2.21_revGen.doc
CALL CONTROL
Page 152 of 188