Changing The Light - CDA ECPK9 Manual For Installation, Use And Maintenance

Table of Contents

Advertisement

Changing the Light

DO NOT CHANGE THE LIGHT BULB IMMEDIATELY AFTER USE AS THE BULB WILL BE HOT. ALLOW IT TO
COOL BEFORE REMOVING IT.
Remove the grease filter, unscrew the light bulb and replace the light with the required light bulb as shown below. Finally,
replace the grease filter.
ECPK9
50W max halogen 2 pin GU10
Table 1
Do not touch bulbs or adjacent areas during or straight after prolonged use of the lights.
The light is designed for use during cooking and not for general room illumination. Extended use of the light can reduce
the life span of the bulb.
Bulb replacement is not covered by the guarantee.
Only use bulbs recommended for your extractor. Do not fit bulbs of a higher power rating. Bulbs of a lower power rating
may be adequate for use, generally last longer and use less energy.
Spare bulbs are available from CDA Customer Care or from your local DIY shop.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ECPK9 and is the answer not in the manual?

Questions and answers

Table of Contents