Installing The Light Bulb And Glass Shade - Minka-Aire TRADITIONAL CONCEPT Instruction Manual Warranty Certificate

INSTALLING THE LIGHT BULB AND GLASS SHADE

WARNING: Shut of the power supply before removing or replacing lamp. In handling of WARNING:
halogen bulb, care should be taken not to touch it with your bare hands. Oil residue will
shorten the life of the halogen bulb. If you accidentally come into contact, wipe thoroughly
with a clean, lint-free, cotton cloth. Allow the bulb to cool off for 10 minutes before changing
the bulb. Use light bulb in accordance with the fan's specification. TO REDUCE THE RISK OF
FIRE DO NOT EXCEED MAXIMUM WATTAGE RATING. FIRE DO NOT EXCEED MAXIMUM WATTAGE RATING.
Step 1. Install 1x100W halogen bulb (included).
Step 2. Raise glass shade up against bottom of fan housing and secure it to the fan by turning
the glass shade clockwise until snug. DO NOT OVERTIGHTEN.
NOTE: The metal light cover included with your fan is an option to replace the glass for the NOTE:
light in the event that you prefer not to use the light feature of your fan. The metal light cover
is not necessary for the light operation; it can be saved for later use if desired.
TO REDUCE THE RISK OF
DO NOT OVERTIGHTEN. (Fig. 10)
100 W HALOGEN
BULB
Fig. 10
10
GLASS
SHADE