Page 1
INSTALLATION AND USE For installation: The hood must be installed at least 50 cm from electric cookers and 65 cm from gas, gas oil or coal cookers. If the installation instructions for a gas cooker specify a greater distance, then this distance must be observed.
Page 5
2 at the bottom: remove the grease filters (Fig. 3.4), 2 at the top on the sides of the bracket. Remove the hood, drill the holes, insert the plugs into the holes (Fig. 3.5), refit the hood, insert and tighten all the screws (Fig.3.6 - Fig.
(plastic bags, polystyrene, etc.) well out Bulb/s: of their reach. Detach the lighting unit and remove Make sure the hood has not been damaged during transport. the burnt-out bulb. Installation and electrical connections must be carried out by Refit the filters.
(see "Trouble-shooting guide"”). • Make sure that children do not play with the 2. Switch the hood off for a few minutes then switch it back appliance. on and see if the problem has gone. 1. Do not connect the appliance to the mains electricity 3.
Need help?
Do you have a question about the Hood and is the answer not in the manual?
Questions and answers