Introduction; Programming Options; Default Parameters - Zebex Z-3070 Series Product Reference Manual

Introduction

Scanning a series of programming barcode labels can configure the
Z-3070 series scanners. This allows decoding options and interface
protocols to be tailored to a specific application. The configuration is
stored in non-volatile memory and will not be lost by removing power from
the scanner.
The scanner must be properly powered before programming. For
RS-232C type scanners, an external power adapter must be used to
supply DC power to the scanner. If a keyboard emulation type scanner
is used with a IBM PC/XT/AT, PS/2 or any fully compatible computers,
power will be drawn from the keyboard port. No external power adapter
is required. If keyboard emulation type scanner is used with any other
non IBM PC compatible computers, an external power adapter may be
needed.

Programming Options

Programmable options are divided into four groups.
The first group includes the options that show the general behavior of the
laser scanner. The second group of options governs the operation of
RS-232C type serial ports. The third group selects the keyboard type
that the keyboard emulation type will be emulated. The last group sets
the decoding parameters for each barcode symbology.

Default Parameters

This table gives the default settings of all the programmable parameters.
The default settings will be restored whenever the "Reset" programming
label is scanned and the laser scanner is in programming mode.
ZEBEX INDUSTRIES INC. All Rights Reserved.
OUTLINE FOR PRODUCT REFERANCE MANUAL
Z-3070 CCD BARCODE SCANNER
13