GENERAL SAFETY RULES WARNING! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire, and / or serious injury. When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electrical shock and personal injury. Read the fol- lowing rules for safe operation before use.
6 Do not abuse cord. Never carry tool by cord. Never yank cord to disconnect it from receptacle. Keep cord away from heat, oil & sharp edges. 7 Do not attempt to alter the tool. Your ETFX50™ has a tested cycling time. It is designed to perform adequately at this rate. Any unauthorized alteration and/or use of unauthorized replacement parts is misuse which could result in a hazardous condition causing possible serious personal injury.
1 MAKE SURE YOU HAVE READ ALL SAFETY INSTRUCTIONS. 2 This tool comes completely assembled. There is no assembly required. Fig.2 OPERATION 1 Loading your tool with staples. Unplug your ETFX50™. The ETFX50™ accepts a full strip of Arrow T50 ® staples in all 6 sizes.
Page 6
Arrow Fastener Co., Inc. 271 Mayhill street, Saddle Brook, N.J. 07663 Tel. 201 843-6900 ACCESSORIES NAIL SET WIRE ATTACHMENT Arrow accessories and genuine Arrow T50® Staples and Brad nails are available at retail outlets, hardware stores, lumberyards and wherever fine tools are sold.
Page 7
1 year after you purchase it. If the product does not comply with this warranty, Arrow will, at its option, repair or replace the product with an equivalent product at no charge to you. This warranty is not transferable. For best performance, use genuine Arrow staples &...
Need help?
Do you have a question about the ETFX50 and is the answer not in the manual?
Questions and answers