Table of Contents
Advertisement
Connections
1. Connectable recorders
MITSUBISHI DIGITAL RECORDER DX-TL5000U, DX-TL5000E
2. Connection example
• Connect this unit and a digital recorder by using the supplied USB cable.
• It is possible to connect some DX-ZD5UE(Z), as shown below.
Digital recorder DX-TL5000U or DX-TL5000E
IN
1
2
OUT
IN
9
10
OUT
CLAMPER
~
AC IN
MAIN
100V
OFF
ON
• The EXTERNAL CONTROL switch is set to ON at shipping. At this status, this unit does not work though you
connet the power cord and set the MAIN switch to ON.
Connect this unit and the recorder as "Connection to link the power supply of the recorder and this unit" shown
below.
• Up to 7 of HDD extension units can be used for one DX-TL5000U (or DX-TL5000E).
• It is not available to connect 5 or more HDD extension units in series.
Connection to link the power supply of the recorder and this unit
• Set the EXTERNAL CONTROL switch to ON and connect the terminals as shown below. It is recommended to use
this unit by linking the recorder's power supply.
• To resume recording or copying after a power failure during normal recording or timer recording, plug this unit into
the outlet of the same system which is being used for the recorder connected.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
VIDEO
VIDEO
3
4
5
6
7
8
OPTION SLOT
Y/C
CAMERA
OUTPUT A
OUTPUT B
CLAMPER
OUT
IN
11
12
13
14
15
16
VIDEO CASCADE
SERIAL BUS
SERIAL BUS
LAN-A
LAN-B
100
10
100
10
RESET
STORAGE
COM
ALARM OUT
ALARM IN
P T Z
GND
RS485
RS485
OUT
IN
RS-232C
Serial bus port
Digital recorder
HDD extension unit DX-ZD5UE(Z)
USB cable
SERIAL BUS input port
HDD extension unit
SERIAL BUS
output port
SERIAL BUS input port
HDD extension unit
7
Advertisement
Table of Contents
