GE Gas Dryer Installation Instructions Manual page 3

RECONNECTING GAS
Listed connector ANSI Z21.24 / CSA 6.10
FLARE
NPT
Note:
only on the original installation and are not to be reused
end of adaptor free of grease, oil and thread sealant.
CAUTION
: Use adapters as shown. Connector
nuts must not be connected directly to pipe threads.
TIGHTEN THE FLEXIBLE
GAS LINE USING TWO
ADJUSTABLE WRENCHES.
Installation Instructions
1/8" NPT PIPE
PLUG FOR
CHECKING GAS
INLET PRESSURE
3/8" NPT
PIPE SIZE
AT LEAST 1/2"
TIGHTEN ALL CONNECTIONS
USING TWO ADJUSTABLE WRENCHES.
DO NOT OVERTORQUE GAS CONNECTIONS!
LEAK TEST
WARNING:
eck all connections for leaks with soapy solution or equivalent.
ply soap solution. Leak test solution must not contain ammonia
ch could cause damage to the brass fittings. If leaks are found,
se valve, retighten the joint, and repeat the soap test.
3