Page 1
SmartWarmer Instruction Manual optional lift-out basket optional adapter ring basket water container water container holder valve cap warming chamber bottle warming unit control panel ON button power cord Y4574...
TO USE 1. Position the Bottle Warmer on any convenient at surface. Be sure to place out of reach of children. 2. Insert the plug into wall outlet. 3. Remove the water container. Unscrew the valve cap. Fill water container with water.
INITIAL CONTROL PANEL SETUP Starting Temperature Bottle Type Room temp Regular Cold Wide Frozen Disposable Food Jar LED Light CONTENT Volume Food 8 – 9 oz. Breast Milk 6 – 7 oz. Formula 4 – 5 oz. 2 – 3 oz. Prepare bottle and place into warming chamber.
Page 4
INVALID SELECTIONS If the selections are not valid the SmartWarmer beeps 3 times and the control panel center light will ash red continuously until a correction is made. The selected icons that are incorrect will ash orange continuously. Correct the icon selection and press the ON button.
Page 5
7. Do not operate this unit with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner. 8. The First Years® does not make, o er, or recommend any accessory attachments for this unit. The use of any kind of accessory attachments may cause injuries.
Page 6
Contact Us If you have a warranty claim or request, or any customer care questions, please contact us: The First Years: 800-533-6708 or via email at parentservicecenter@the rstyears.com Learning Curve: 800-704-8697 or via email at cs@learningcurve.com...
Need help?
Do you have a question about the babyPro and is the answer not in the manual?
Questions and answers