Using The Warming Zone - GE PS920 Owner's Manual

Surface Units (Cont.)
Throughout this manual, features and appearance may vary from your model.
Using the Bridge Zone (on some models)
To use the bridge zone, adjust the settings for the left
rear and left front burners to create one large area for
even cooking. Turning both burners to the same setting
will maintain an even power across the bridge zone.

Using the Warming Zone

WARNING
FOOD POISON HAZARD: Bacteria may grow in food at
temperatures below 140°F.
Always start with hot food. Do not use warm setting to
heat cold food.
Do not use warm setting for more than
2 hours.
The Warming Zone is located in the back center of the
glass surface.
To use the Warming Zone:
1. Touch the Warming Zone On/Off pad.
2. To select the desired control setting, touch the Select
pad once for LO, twice for MED or three times for HI.
To turn off the Warming Zone:
Touch the Warming Zone On/Off pad. For best results,
all foods on the Warming Zone should be covered with
a lid or aluminum foil.
Always use pot holders or oven mitts when removing
food from the Warming Zone, as cookware will be hot.
Do not use plastic wrap to cover food. Plastic may
melt onto the surface and be very difficult to clean.
Use only cookware recommended for top-of-range
cooking.
10
Models with a bridge zone only.
49-80694