Table of Contents
Advertisement
Advertisement
Table of Contents
Summary of Contents for Rocam Technology NC400HD
- Page 1 IP Camera NC400HD User Manual Version 1.0 2013 年 11 月 01 日...
- Page 2 Catalogue Chapter 1：Introduce 1.1 Product Introduce 1.2 Product Applications 1.3 Environmental Requirements Chapter 2：Function Introduce 2.1 Basic Function Introduce 2.2 Advanced Function Introduce Chapter 3：IP Camera Installation Wizard Chapter 4：Detailed Interface Introduce 4.1 Login Interface 4.2 Login Interface Options 4.3 Monitoring Interface 4.4 Interface Settings 4.4.1 Network Setting 4.4.2 Alarm Setting...
- Page 3 Chapter 1：Introduce 1.1 Product Introduce This product is one of integrated IP camera developed for network video surveillance. Using high-performance chip makes the media processor that can integrate audio and video capture, compression, transmission all-in-one. H.264 encoding algorithm ensures a clearer, smoother video transmission.
- Page 4 Sound Card: Needed voice monitor、Tow-way intercom necessary Hard Disk: If you need to record images, should not be less than 40GB Operating System:32, 64-bit Windows2000、Windows XP、 Windows2003、Windows Vista and other operating systems. Chapter 2：Function Introduce 2.1 Basic Function Introduce IP Cameras are mainly used for remote video image transmission based on IP networks.
-
Page 5: Specifications
Built-in Web Server, users can achieve real time monitoring and setting management via standard browser. Support WIFI 802.11b/g/n wireless network Support remote system upgrading DDNS support, support for LAN and internet (dial-up Internet access, Internet routers, etc.) ... -
Page 6: Login Interface
Sampling 8KHz/16bit frequency/Bit wide Encode format/Rate 32kbps/ADPCM Network Interface 10Base-T / 100Base-TX, RJ45 interface TCP/IP,HTTP,TCP,UDP,SMTP,FTP,DHCP,DNS,DDNS,NTP,UPnP, Network Protocols RTSP,PPPoE, P2P etc. Wireless Network WiFi802.11b/g/n Alarm Detection Support Motion detection/1 Channel input trigger Alarm 1 way output / E-mail pictures / upload video by FTP / Alarm Actions messages alarm(coordinate to server) Nominal Voltage... - Page 7 4.2 Login Interface Options Product support IE、Firefox、Safari、google and other major browses/iPhone 、iPad and other IOS devices and smart mobile browse. According to your current way of opening the device to select the corresponding entrance to entry into interface. Wrong choice may prevent the entrance normal viewing screen.
- Page 8 The camera will Left-right cruising automatically after select on, it will cruising about 1 hours if no manual stopped.Infrared light will be start work automatically in low-light condition. The number larger,the speed faster. Infrared light turn off in low-light condition. Image inversion: In selected, the image displaying will be upside down.Mirror image mode: In Selected, the displayed image will reversed left to right.
- Page 9 4.4.1 Network setting Basic network setting Support DHCP Dynamic IP and Static IP. Use Static IP If you need set the router port mapping. Do not modify above parameters arbitrarily without certain levels computer network support. Wireless LAN setting Below set figure for wireless networking,where the security mode support :WEP、WPA Personal（TKIP）...
- Page 10 1) When using the scan button,the camera if you can search the wireless signal to the router? 2) SSID is consistent with the wireless router's SSID? 3) There is a special character of Wireless SSID and password or not, change it if yes. 4) Whether to open the wireless mac address filtering? 5) Whether to open the ARP binding ?(camera wireless and wired LAN is two mac address, the same IP).
- Page 11 computer can browse web pages. 4.4.2 Alarm settings Alarm settings Alarm trigger Mobile monitoring technology: General be called motion detection. Commonly used in unmanned video surveillance and alarm.CPU through the camera will be carried out according to certain algorithms capture frame rate according to different calculating and comparing the resulting image when the screen changes,for example,people passed ,camera be moved , the the calculated result of the comparison show that the number will exceed the threshold and indicates...
- Page 12 External input arming:When it is selected ,can alarm through the input signal of the GPIO external linkage equipments, also be called Linkage box alarm. A complete alarm triggered task requires the following factors: 1) Triggering conditions 2) Triggering time 3) The action after triggered. Such as set motion detection arming: The first is the trigger condition ,and where the“Motion Detection Arming”need be selected.
- Page 13 the alarm upload pictures, so that the camera can send alert message or photos to your email after camera triggered the alarm. Upload pictures interval(seconds) means the interval of sending pictures to FTP sever. Enable the mail notice after alarm, do not forget to set the Mail Settings.
- Page 14 SMTP Code: password for test@163.com Receiver: You can set up to four mailboxes for mail recipients.when there is an alarm action, the camera will automatically log in test@163.com send mail to the receiver. Notice: Please click on the "Settings" button, and click to save the parameters then teste;...
- Page 15 Camera information Device information is in above’s chart: wired LAN MAC, wireless LAN MAC, the device system firmware version, device application firmware version information. Name settings Here to display the camera name, such as name in find, followed by multiple devices settings’s name etc. Time settings Here you can set camera time through NTP server or PC user settings.
- Page 16 visitors Multi-screen setup When there are same types of products, you can set your browser to multi-screen viewing, you can set up to 9 simultaneous viewing. This function supports the LAN device is automatically added after clicking refresh automatically scans all the same type of equipment local area, select list of the machine, and then enter the user name password.
- Page 17 Maintain Click on "Restore Factory Settings", you can restore the factory default camera parameters. Click the "Restart camera", you can reboot the camera. Upgrade the system firmware: Click "Browse" to select the system firmware upgrade package file, click "Upgrade" Waiting camera system restart to complete the firmware upgrade is completed.
- Page 18 5.2 Photo and video Photo Left-click the photo button, the system will automatically capture the current screen and jump a new window display pictures; Note: If you do not jump out the window, because your current browser may is prohibited to jump out the window, you can check in your browser settings to allow pop-up windows;...
- Page 19 When the user need quick monitor the object, he can callout the position he want to monitor by callout command of control device. How to set presetting bit? Find the presetting bit in monitoring interface and set. Firstly, adjust the camera PTZ to the set position, click set button, preset form will pop up as follow icon, choose the preset number, the frame will shut off automatically.
- Page 20 Automatic identification of entrance guard. Set motion detection protection. Details please check alarm set. Chapter 6 Common questions Q: Forget user name and password A: Reset the camera, the user name and password is the value of restored factory settings. user:admin password is blank. Please connect with electricity before reset, then long press the reset button for 30 seconds to reach reset the camera.
- Page 21 Q: Under windows vista 7, IE cant find the video file. A: Open control payout—system and safety—change user account control setting----Set the level to never notice. Copyright© Shenzhen Rocam Technology Co.,Ltd. All Rights Reserved 2013 年 11 月 01 日...
Need help?
Do you have a question about the NC400HD and is the answer not in the manual?
Questions and answers