Cleaning The System - Cisco TelePresence VX Clinical Assistant Installation And User Manual

Cleaning the System

The surface materials of the VX Clinical Assistant are
durable and easy to maintain.
Please refer to the respective Materials Safety Data
Sheets (MSDS) for detailed descriptions for each
product from its manufacturer.
DuPont Corian® Solid Surface
TM
www.dupont.com
www.corian.com
Wilsonart® Chemsurf®
www.wilsonartlaminate.com
800-433-3222
141299.21 Cisco TelePresence VX Clinical Assistant
DuPont Corian® Solid Surface
TM
(light-colored solid material)
General and everyday cleaning can be
done by wiping the surface with a damp
cloth or sponge, then dry with soft cloth
or paper towels. An ammonia-based,
non-abrasive cleaner may be used for
stains.
Disinfect the surface with the appropriate
sterilant or disinfectant.
Prolonged exposure to concentrated, un-
diluted disinfectant solutions may degloss
or etch solid surface material and require
refinishing to restore the surface to its
original condition. Using a wet Scotch-
Brite® pad and bleaching and/or abrasive
cleanser may restore the surface finish.
GENERAL CLEANING:
1. Before cleaning, ensure that the monitor is
turned off.
2. Direct the suction nozzle of vacuum cleaner
to remove dirt/dust accumulated in crevices.
Hand brush may be used to assist in removing
settled dirt/dust.
3. Use cloth dampens with ethyl alcohol to wipe
TM CTS-CA2-K9/CTS-CA2-P240V-K9 v1.2 | 2013 JAN | © 2012-2013 Cisco Systems, Inc. All rights reserved.
clean the surfaces. Do not use excessive
alcohol as the disinfectant is flammable.
4. Use 0.1% hypochlorite solution to wipe clean
the surface of CPU or laptop and monitor
casings. Wait for 5 minutes and use another
piece of cloth dampened with water to clean
off residual hypochlorite.
5. The glass surface of video display terminals
with cathode ray tubes may be cleaned and
Wilsonart® Atlantis D525-60
(blue inlaid laminate material)
Clean with warm water and mild
soaps, such as those used for hands
or dishes. Avoid cleansers contain-
ing abrasives, acids, or alkalis.
Stubborn stains may be removed
with a 1.5 minute exposure to hy-
pochlorite bleach (such as Clorox®)
followed by a clean water rinse.
It is recommend that you not allow
any of the following reagents to
remain in contact with the decorative
surface:
1. Hypochlorite bleach, except as de-
scribed above
2. Hydrogen peroxide solution
3. Mineral acids, hydrochloric acid such
as Lime-A-Way™, sulfuric or nitric acid
4. Caustic solutions containing greater
than 2% lye, such as Drano®
5. Sodium bisulfate, such as Sani-Flush®
6. Potassium permanganate
7. Berry juices
8. Silver nitrate, in 1% concentration
9. Gentian violet
10. Mild silver protein, such as 20% Argyrol
11. Bluing
12. Fabric dye, such as Tintex® or Rit®
13. Alcohol containing 1% iodine in solu-
tion.
disinfected using diluted hypochlorite solution.
6. The video display surface of LCD monitor
should be wiped gently using a damp cloth.
28