Mounting And Removing The Unit - Panasonic Strada CN-NVD905U Installation Instructions Manual

Mounting and removing the unit

Mounting procedures (A)
IMPORTANT
When this unit is installed in a dashboard, ensure that there is suffi cient air fl ow around the unit to prevent damage
from overheating. Do not block any ventilation holes on the unit.
Insert the Mounting collar 

into the dashboard, and bend
the mounting tabs out with a
screwdriver.
Note:
 The car model, installation conditions and
combination of the units used may impose some
restrictions on opening and closing the monitor
as well as on the angle and position to which the
monitor can be adjusted.
 Method for fi xing the rear of the unit
(a) Using the Rear support strap  .
3 mm
 Hex. nut
(5 mm)
 Rear support strap
6
6
(When using Mounting collar  )
Fire wall of car
 Tapping screw
(5 mm  16 mm)
 Mounting bolt
(5 mm)
Attach the mounting spring 

to the unit.
(b) Using the Rubber cushion (option)
Rear support bracket
(Provided on the car)
Rubber bushing (option)
 Mounting bolt
(5 mm)
 Flat-Head screw
(5 mm  6 mm)
 Mounting spring