Data Cable - Nokia Mobile Phone User Manual

made, select No. After pairing, the device is saved to the
paired devices page.
To give a nickname to the paired device, select
Assign short name. The nickname is displayed in your
device.
To delete a pairing, select the device whose pairing you want
to delete and Options > Delete. To delete all pairings, select
Options Delete all. If you are currently connected to a
>
device and cancel the pairing with that device, pairing is
removed immediately, and the connection is ended.
To allow a paired device to connect automatically to your
device, select Set as authorised. Connections between your
device and the other device can be made without your
knowledge. No separate acceptance or authorisation is
needed. Use this status only for your own devices, such as
your compatible headset or computer, or devices that belong
to someone you trust. If you want to accept connection
requests from the other device separately every time, select
Set as unauthorised.
To use a Bluetooth audio accessory, such as a Bluetooth
handsfree or headset, you need to pair your device with the
accessory. For the passcode and further instructions, see the
accessory user guide. To connect to the audio accessory,
switch on the accessory. Some audio accessories connect
automatically to your device. Otherwise, open the paired
devices tab, and select the accessory and
to audio device.
Block devices
Select Settings
> >
© 2009 Nokia. All rights reserved.
Options
Options
>
Connectivity > Bluetooth.
1. To block a device from establishing a Bluetooth
connection to your device, open the paired devices tab.
2. Select a device you want to block and
>
To allow the pairing of a device again after it was blocked,
delete it from the blocked devices list.
Open the blocked devices tab, and select
Delete.
If you reject a pairing request from another device, you are
asked if you want to block all future connection requests from
this device. If you accept the query, the remote device is
added to the list of blocked devices.

Data cable

To avoid damaging the memory card or corrupting data, do
not disconnect the USB data cable during a data transfer.
Transfer data between your device and a PC
1. Insert a memory card in your device, and connect the
device to a compatible PC with the USB data cable. Always
connect the data cable first to your device, and then to
the other device or computer.
2. When the device asks which mode to use, select
storage. In this mode, you can see your device as a
removable hard drive in your computer.
3. Transfer data between the computer and your device.
Connect
4. End the connection from the computer (for example, from
an Unplug or Eject Hardware wizard in Windows) to avoid
damaging the memory card.
Options > Block.
Options
>
Mass
77