Add A Stream Media Server - HIKVISION iVMS-4200 User Manual
Intelligent video management system
Hide thumbs
Also See for iVMS-4200:
- User manual (114 pages) ,
- How to use manual (6 pages) ,
- User manual (91 pages)
Table of Contents
Advertisement
iVMS-4200 Quick Start Guide
etc.).
Go back to the device management interface, click modify to change the device
information, and Click remove to delete the device.
4.2 Add a Stream Media Server
Click
to enter the Stream Media Server configuration interface. And
then click Add, the configure dialog box will popup as followed.
Input the Nike Name, IP address and Port (The Port: 554 is the default RTSP
number), and then click Add to keep it.
© 2006-2010 by HIKVISION. All rights reserved.
14
- Quick Links:
- System Configuration
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the iVMS-4200 and is the answer not in the manual?
Questions and answers
здравствуйте, настроено неправильно время. не могу найти как изменить. помогите пожалуйста
To change the time settings in Hikvision iVMS-4200:
1. Use NTP Server: Set all cameras and NVRs to use a Network Time Protocol (NTP) server for automatic time synchronization.
2. Enable DST (If Applicable): If in the UK, enable Daylight Saving Time (DST) to automatically adjust for British Summer Time (BST).
3. Set Time Zone: Choose the correct time zone for your location. If the time is incorrect by +/- 1 hour, adjust the time zone setting accordingly.
4. Batch Time Sync: Use the built-in batch time sync tool in iVMS-4200 to update multiple devices simultaneously. Go to the Tools menu, select Batch Time Sync, choose the devices, and confirm the synchronization.
These steps ensure accurate time settings on Hikvision NVRs and cameras using iVMS-4200.
This answer is automatically generated