Making A Call - Swissvoice ePure User Manual

ePure 2nd generation

Making a call

● Dial the desired number using the keypad.
● Press the Talk key
Accepting a call
● Incoming calls are signalled by a ring tone and a quick
flashing of the control LED on the handset.
● Press the Talk key
Ending the call
● Press the End call key
Calls cannot be made if the battery is almost discharged or
the handset is out of range of the base station.
Switch ringer off
When a call is coming in, press and hold the
3 seconds. The ringer is switched off for this call
Set speaker/loudspeaker volume
You can adjust the speaker/loudspeaker volume during a
conversation.
Set the desired volume using the navigation key +/-.
Switch handset off
● Press and hold the End call key
● Press and hold again the End call key
handset.
Set alarm
● Press
+/- and press OK.
● Select Set Alarm using the navigation key +/- and press
OK.
● Select the desired alarm function (e.g. On once), enter the
alarm time and press OK.
8
.
, select Clock/Alarm using the navigation key
and conduct your conversation.
.
key for approx.
.
(approx. 5 sec).
to reactivate the
ePure