Daylight Driving Lights - Skoda Yeti Owner's Manual

Main beam light and low beam light
– Switch the ignition and all lights off.
Turn the protective cap in direction of arrow OPEN
–
Unplug plug .
– A
– Press the wire clamps B down until they are released from the secured posi-
tion.
Remove the light bulb and insert the new light bulb in such a way that the
– C
fixing lugs of the light bulb socket fit into the recesses at the reflector.
Installation is carried out in the reverse order.
Note
We recommend that you have the headlight setting checked by a Skoda Service
Partner after replacing the light bulb.
Fog lights
Using the system Safety
Fig. 184 Removing the bulb for the main
beam light and low beam light
⇒ f ig. 182
and remove it.
Fig. 185 Removing the bulb for the fog
light
Driving Tips
Removing the bulb for the fog light
– Switch the ignition and all lights off.
– Remove the rubber protective cap
– Unplug plug 1 .
Take the faulty bulb out of the fixture
–
wards and insert a new one.
– Insert the protective cap.

Daylight driving lights

Remove the bulb for daylight driving lights
– Switch the ignition and all lights off.
– Remove the rubber protective cap

Unplug plug .
– 1
Take the faulty bulb out of the fixture
–
insert a new one in the reverse procedure.
Insert the protective cap.
–
General Maintenance Breakdown assistance
Fuses and light bulbs
⇒ f ig.
A 181.
by pressing the light socket down-
2
Fig. 186 Remove the bulb for daylight
driving lights
⇒ f ig.
A 181.
by turning in direction of arrow and
2
Technical data
225

