Making A Call; Dial A Number; Speed Dialing (Preset Dial); Calling A Number In The Phone Book - Kenwood KDC-BT838U Instruction Manual

Making a call
1
Enter dialing method mode
Press the [ATT] button for at least 1 second.
2
Select a dialing method
Press the Control knob.
"DIAL"
»
"INITIAL"
»
"P-BOOK"
»
"OUT-CALL'
»
"IN-
CALL'
»
"MIS-CALL"
Methods of operations in the above modes are
described below.
3
Exit the dialing method mode
Press the [ATT] button for at least 1 second.
Dial a number
1
Enter dialing method mode
Press the [ATT] button for at least
1
second.
2
Select the number dial mode
Press the Control knob.
Select the "DIAL" display.
3
Enter a phone number
Press the number ([1] - [0]), #([FM]), *([AM]), or
+([~])
button on the remote controller.
4
Make a call
Press the [DIRECT] button on the remote
controller.
To
erase the entered phone number digit by
digit:
Press the
[~]
button on the remote controller.
@2
• You can input max 32 digits.
Speed dialing (Preset dial)
1
Enter dialing method mode
Press the [ATT] button for at least
1
second.
2
Press the Control knob.
Select the "DIAL", "P-BOOK", "OUT-CALL', "IN-CALL'~ or
"MIS-CALL" display.
3
Enter preset dial mode
Press the [FNC] button.
4
Select the number you want to recall from the
memory
Turn the Control knob or push it towards left
or right.
5
Press the Control knob.
6
Press the [FNC] button.
7
Make a call
Press the Control knob for at least 1 second.
~
~
• You need to register the preset dial number. (page' 6)
Calling a number in the Phone Book
1
Enter dialing method mode
Press the [ATT] button for at least 1 second.
2
Select the Phone Book mode
Press the Control knob.
Select the "INITIAL' display, proceed to step 3.
Select the "P-BOOK" display, proceed to step 4.
3
Select the initial to be searched for
~tilllijPfJ:~!~'?~~1Op!ij~o~i.I'lltli;_~~~II~~{'
Move to the next character. Push the Control knob towards right
or left.
- - - - - - -
Move to the next row. Push the Control knob towards up or
down.
- - - - - - -
Determine the selected initial. Press the Control knob for at least 1
second.
4
Select the name
5
Make a call
Press the Control knob for at least 1 second.
~
~
• During search, a non-accent character such as "u" is
searched for instead of an accent character such as '\i".
English I
15