Using The Remote Control - Whirlpool ROOM AIR CONDITIONER Use & Care Manual

NOTE: Remote control may differ in appearance.
NOTE: One CR2025 battery (included) powers the remote
control. Replace battery after 6 months of use, or when the
remote control starts to lose power.
Power
Press POWER to turn on air conditioner.
Mode
Press MODE to select Cool, Dry or Fan.
6 th Sense ™ System Control
The air conditioner automatically selects Cool or Dry mode,
depending on room temperature and sets the temperature to
79ºF (26ºC).
The temperature set point can be adjusted down to 75ºF
(24ºC) or up to 83ºF (28ºC). Press the up or down arrow
button once to change the temperature 2ºF (1ºC) or twice to
change it 4ºF (2ºC).
If the current room temperature is lower than the temperature
set point, Dry mode is selected. Fan runs on Auto speed only.
12

Using the Remote Control

If the current room temperature is higher than the
temperature set point, Cool mode is selected. Fan speed may
be selected by the user.
1. Press 6
2. In Cool mode, press FAN to select High, Med, Low or Auto.
RapidCool
Used for fast cooling. The air conditioner automatically sets fan
speed to High and temperature to 64°F (18ºC).
NOTE: 6 th
RapidCool control is selected.
1. Press RapidCool
sets fan speed to High and temperature to 64°F (18ºC).
2. To turn RapidCool
button, Mode, Fan, Power or the up arrow button.
Fan Speed
Press FAN to select High, Med, Low or Auto.
NOTE: Auto fan speed cannot be selected in Fan mode.
Sleep Control
NOTES:
If the current room temperature is 80ºF (26ºC) or higher, the
set temperature will not change when Sleep control is
activated.
If the current room temperature is below 80ºF (26ºC), the set
temperature will automatically increase 2ºF (1ºC) during the
first 2 hours after Sleep control is activated.
The set temperature will not increase during the last 6 hours
of Sleep control.
1. Press MODE to select Cool or Dry.
2. Press FAN to select High, Med or Low.
3. Press the up or down arrow button to set the temperature.
4. Press SLEEP. After 10 seconds, the lights on the control
panel display will dim. The mode indicator lights will remain
on.
NOTE: The mode, temperature and fan speed may be
adjusted during Sleep control. After 10 seconds, the lights on
the control panel display will dim again.
th Sense ™ System control.
™ Control
Sense ™ System control button does not operate when
™ control. The air conditioner automatically
™ control off, press the RapidCool control