Table of Contents
Related Manuals for Philips CEM2090
Summary of Contents for Philips CEM2090
- Page 1 Always there to help you Register your product and get support at www.philips.com/welcome CEM2090 Question? Contact Philips User manual Mode d’emploi Benutzerhandbuch Manuale utente Manual del usuario Gebruiksaanwijzing...
-
Page 2: Table Of Contents
Contents 1 Important 8 Adjust system settings Safety Turn demo mode on/off Notice Dimmer Dance 2 Your car audio system 9 Additional information Introduction What's in the box Replace fuse Overview of the main unit Reset 3 Install the car audio 10 Product information Connect wires Mount into the dashboard... -
Page 3: Important
Any changes or modifications made to this caused by failure to follow instructions, the device that are not expressly approved by warranty does not apply. Philips Consumer Lifestyle may void the user’s • This apparatus is designed for negative authority to operate the equipment. ground (earth) 12 V DC operation only. - Page 4 Microsoft Corporation in the United States and/or other countries. This apparatus includes this label: 2013 © Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.
-
Page 5: Your Car Audio System
Main unit (with a sleeve) Congratulations on your purchase, and b Front panel welcome to Philips! To fully benefit from the c Trim plate support that Philips offers, register your product at www.philips.com/welcome. d Carrying case for front panel e Rubber cushion Introduction f Screw x 1 pc... -
Page 6: Overview Of The Main Unit
Overview of the main unit a SOURCE e ZONE • Select audio source. • Select tuner band. b MENU • Select MP3/WMA folder. • Access system menu. • Switch music listening zone. • Return to previous menu. • Eject disc. • Turn the unit on or off. -
Page 7: Install The Car Audio
• In radio mode, press and hold to make the corresponding adjustment. If you have access to tuner auto store. any questions regarding installation kits, consult your Philips car audio dealer. • Select preset radio station No.5/6. • Start play. Caution • Pause or resume play. -
Page 8: Connect Wires
Right speaker (Front) tape. strip Purple/black Right speaker (Rear) strip Note Ignition key +12V DC when • Consult a professional to connect CEM2090 as ON/ACC instructed below. Blue Motor/electric antenna relay control lead Blue/white Amplifier relay control lead Connect the supplied male connector to the unit. -
Page 9: Mount Into The Dashboard
• The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Be sure to make proper connections to prevent damage to the unit. Mount into the dashboard If the car does not have an on-board drive or navigation computer, disconnect the negative terminal of the car battery. -
Page 10: Attach The Front Panel
Slide the unit into the dashboard until you hear a click sound. Detach the front panel You can detach the front panel to deter theft. Press to release the panel. Pull the panel towards you to disengage it from the classis. Reconnect the negative terminal of the car battery. -
Page 11: Get Started
Always follow the instructions in this chapter in sequence. Press MENU repeatedly until current time is flashed. If you contact Philips, you will be asked for the model and serial number of your apparatus. The Rotate to set hour. model number and serial number are on the bottom of your apparatus. -
Page 12: Mute The Button Beep
5 Listen to radio Press ZONE. » The current setting is displayed. Rotate to select a setting: • [ALL] • [FRONT-L] (Front left) • [FRONT-R] (Front right) Tune to a radio station • [FRONT] Press SOURCE repeatedly to select radio mode. -
Page 13: Store Radio Stations In Memory
Select tuner sensitivity Play with RDS To receive more radio stations or only stations The RDS (Radio Data System) function with strong signal, you can adjust the tuner operates only in areas with FM stations sensitivity. broadcasting RDS signals. If you tune to an RDS station, the station name are displayed. -
Page 14: Select Alternate Frequencies
Set region for AF tuning Item Program Description type You can define AF tuning region: CULTURE Culture, religion and society [REG Only stations in current region can be tuned to automatically. SCIENCE Science [REG All stations can be tuned to VARIED Entertainment programs OFF] automatically. POP M Pop music ROCK M... -
Page 15: Play Audio Files
6 Play audio files Set RDS clock You can use time signal that is broadcast together with the RDS signal to set the clock of Note the unit automatically. • Ensure that the disc or device contains playable files. Press MENU. repeatedly until [CT] is Press displayed. Rotate to select a setting: Play a disc • [CT ON]: turn on the RDS clock. -
Page 16: Play From Usb
Press to select the folder. Play from USB » The system starts playing the first track under the folder. Note • Ensure that the USB device contains playable music. View play information During playing, press DISP repeatedly to view: Insert the USB device • Track number and elapsed play time • Folder Slide the USB socket cover marked • File... -
Page 17: Connect External Sound Source
7 Adjust sound Connect external sound source Connect the external sound source to AUDIO IN socket with a 3.5 mm cable. Adjust volume Press SOURCE repeatedly until [AUDIO IN] is displayed. Turn clockwise/counterclockwise to increase/ Operate the external component (refer to decrease volume. -
Page 18: Select Preset Equalizer
8 Adjust system Select preset equalizer settings Press EQ / AUDIO. » Current Equalizer setting is displayed. Press EQ / AUDIO again to select a preset EQ setting: • [OPTIMAL] (optimal) Turn demo mode on/off • [FLAT] (flat) • [POP] (pop) Press MENU. -
Page 19: Additional Information
Replace the fuse. Note • If the new fuse gets damaged again, there may be an internal malfunction. Consult your Philips dealer. Reset You can reset the unit to its default setting. Detach the front panel. Press the reset button by using a ball-point pen or a similar tool. -
Page 20: Product Information
10 Product Compatible USB devices: • USB flash memory: USB 1.1 host with information interface reading all speed support (1.1, 2.0) • USB flash players: USB 1.1 host with interface reading all speed support Note (1.1, 2.0) Supported formats: • Product information is subject to change without prior notice. -
Page 21: Troubleshooting
Battery cable is not correctly connected. requesting service. If the problem remains Connect the battery cable to the terminal unsolved, go to the Philips web site (www. that is always live. philips.com/support). When you contact Philips, ensure that your apparatus is nearby and the Display show ERR-12 model number and serial number are available. -
Page 22: Glossary
12 Glossary A file format with a sound data compression system. MP3 is the abbreviation of Motion Picture Experts Group 1 (or MPEG-1) Audio Layer 3. With the MP3 format, one CD-R or CD-RW can contain about 10 times more data than a regular CD. RDS (Radio Data System) RDS tuners can automatically tune in stations according to the types of music (or talk) they broadcast. - Page 23 Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved. CEM2090_12_UM_V1.0...