Contents 1 Important 2 Your Bluetooth speaker Introduction What's in the box Overview of the speaker 3 Get started Power supply Turn on 4 Use Bluetooth devices Connect a device Play from Bluetooth device Control your phone call Disconnect the Bluetooth-enabled device 8 Enter Bluetooth pairing mode Connect another Bluetooth-enabled device...
1 Important Warning • Never remove the casing of this speaker. • Never lubricate any part of this speaker. • Never place this speaker on other electrical equipment. • Keep this speaker away from direct sunlight, naked flames or heat. • Make sure that you always have easy access to the power cord, plug, or adaptor to disconnect the speaker from the power.
2 Your Bluetooth speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this speaker, you can • enjoy audio from your Bluetooth-enabled devices or other external audio devices; • charge mobile devices through the micro USB socket.
Overview of the speaker i NFC • Turn the speaker on or off. • Connect a device with NFC feature through Bluetooth. b PAIRING • Enter Bluetooth pairing mode. • Disconnect Bluetooth connection. c DC IN • Connect power. d AUDIO IN • Connect an external audio device.
3 Get started Insert 4 AA batteries with correct polarity (+/-) as indicated. Always follow the instructions in this chapter in sequence. Power supply Either AC power or alkaline battery (LR6 AA) can be used as power supply of this product. Option 1: Battery power Close the battery compartment.
Turn on Press . » The speaker switches to Bluetooth mode. » The LED indicator flashes blue. Note • If battery is low, the LED indicator flashes red. Switch to standby mode The speaker switches to standby mode in the following situation: • Press again; • The connection with Bluetooth device or other device is invalid for 15 minutes;...
(see the user manual of technology that enables short-range wireless the device). communication between various NFC When [Philips BT5500] is displayed on compatible devices, such as mobile phones and your device, select it to start pairing and IC tags.
Play from Bluetooth device Connect another Bluetooth- enabled device Note Disable Bluetooth on the current device, and • If there is an incoming call on the connected mobile then connect another device. phone, music play pauses. After successful Bluetooth connection, play audio on the Bluetooth device.
5 Other features Note • The USB socket is for charging only. Listen to an external device With this speaker, you can also listen to an external audio device such as an MP3 player. CHARGING Note • Make sure that music playback through Bluetooth is paused.
V4.0 Supported Profiles HFP, A2DP, AVRCP Range 10 m (Free space) General information Power Supply - AC Power (power Brand name: PHILIPS; adapter) Model: TPA103B- 18120-EU; Input: AC100-240 V~, 50/60 Hz, 1.1A MAX; Output: DC 12 V 1.5 A; - Battery 4 x 1.5 V LR6 AA...
If the problem remains • This product is already connected with unsolved, go to the Philips Web page (www. another Bluetooth-enabled device. philips.com/support). When you contact Philips, Disconnect that device and then try again.
The Bluetooth® word mark and logos are of Directive 1999/5/EC. You can find the registered trademarks owned by Bluetooth Declaration of Conformity on www.philips.com/ SIG, Inc. and any use of such marks by WOOX support. Innovations is under license.