Faq; Frequently Asked Questions - Panasonic KX-TGE260 Quick Manual
Hide thumbs
Also See for KX-TGE260:
- Operating instructions manual (109 pages) ,
- Operating instructions manual (96 pages) ,
- Quick manual (10 pages)
Table of Contents
Advertisement
Frequently asked questions
Question
Why is _ displayed?
Why am I unable to pair a
cellular phone to the base
unit?
How can I increase the
handset volume level?
Why is the conversation
noisy or cutting off?
Can I add another
accessory handset to my
base unit?
Can I keep the batteries
charging all the time?
How can I answer a call
waiting call (2nd call)?
Cause/solution
L The handset is too far from the base unit. Move closer.
L The base unit's AC adaptor is not properly connected. Reconnect
AC adaptor to the base unit.
L The handset is not registered to the base unit. Register it.
1
Handset: {MENU}(13)
2
Base unit: Press and hold {LOCATOR} or {HANDSET
LOCATOR} for about 5 seconds.
3
Handset: Press {OK}, then wait until a long beep sounds.
L Depending on the compatibility of the cellular phone, you may not be
able to pair it to the base unit. For more information, please visit
http://www.panasonic.com/link2cell
L Confirm that the Bluetooth feature of your cellular phone is turned
on. You may need to turn this feature on depending on your
cellular phone.
L Press the volume key {+} repeatedly while talking.
L Try to relocate the base unit so that distance to the handset is
minimized.
L If the same problem occurs even if the handset is next to the base unit,
please visit: http://www.panasonic.com/support
L Yes, you can add up to 6 handsets (including the handset(s) sold
with your base unit) to a single base unit.
L To purchase additional accessory handset(s) (KX-TGEA20),
please visit: http://www.pstc.panasonic.com
TTY users (hearing or speech impaired users) can call 1-866-605-
1277.
L You can leave the handset on the base unit or charger anytime.
This will not harm the batteries.
L Press {CALL WAIT} when you hear the call waiting tone.
– 10 –
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the KX-TGE260 and is the answer not in the manual?
Questions and answers
Why is the play/sto flashing
The play/stop button on the Panasonic KX-TGE260 is flashing because there are new voice mail messages. If "Voice mail msg. via phone co." is displayed and the indicator flashes slowly, new voice mail messages are present. To stop the flashing, listen to the voice mail messages. If the voice mail access number is not stored, the indicator does not flash.
This answer is automatically generated
How do I pair a new handset with kx tge260 base
To pair a new handset with the Panasonic KX-TGE260 base:
1. On the handset, press {MENU} and enter 13.
2. On the base unit, press and hold the registration button until the registration process begins.
This registers the handset to the base unit.
This answer is automatically generated