Tuner (Fm/Am) Operation; Tuner Tft Display; Switch To Radio Tuner Source; Select Fm/Am Band - XZENT XT8020 Instruction Manual

tuner (FM/aM) oPeratIon

Tuner TFT Display

1. Touch to change among the following bands: FM-1, FM-2, FM-3 and AM.
2. Touch to seek down.
3. Touch to seek up.
4. Touch to tune down once a step.
5. Touch to tune up once a step.
6. Touch to activate/deactivate scan mode.
7. Auto store.
8. Program scan.
9. Touch to display the numeric keypad on the screen.

Switch to Radio Tuner source

Press SRC on remote control or FM/AM icon on TFT to switch to the tuner source.

Select FM/AM Band

Touch the
remote control to change among the following bands: FM-1, FM-2, FM-3 and AM.

Auto Tuning

Press the button (
the next available channel by increasing the tuning frequency. Press the button again to
stop searching.
Press the button (
seek the next available channel by decreasing the tuning frequency. Press the button
again to stop searching.

Manual Tuning

Press the ( ) button on the remote control or touch the
tuning frequency one step at a time.
Press the ( ) button on the remote control or touch the
tuning frequency one step at a time.
button on the screen, or press the BAND button (■/BAND) on the
) on remote control or touch the
) on the remote control or touch the
button on the screen to seek
20
button on the screen to
button to increase the
button to increase the