What's Included In The Box; Preparations - Mitsubishi Electric EY-3DGS-80U User Manual

What's included in the box

• Pouch (1)
• Nose pad (1)
• Rubber ring (2)
• Coin type lithium battery (CR2032) (1)
• User manual
The nose pad is attached on the 3D glasses.

Preparations

Before using, install the supplied battery. (Use one coin type lithium battery
(CR2032) and one coin.) In addition, remove the nose pad or attach the supplied
rubber ring as necessary.
1. Turn and remove
the cover accord-
ing to the arrow us-
ing a coin.
4. If necessary, remove the nose
pad.
When you wear the 3D glasses over
the vision correction glasses, choose
whether or not to attach the nose pad
according to your comfort.
Important:
Install the battery correctly.
The duration of the battery is about 70 hours in continuous use. (The duration varies
depending on the use.)
EN-8
2. Install the battery.
Install the battery with the
+ side upward.
5. Attach the rubber ring as neces-
Nose pad
Gap
If the 3D glasses are too large and slip
down from your nose, put the thicker part
(a) (for children) or the thick part (b) (for
ladies or users who have small face) of
the rubber ring in the gap of the temple
of the glasses as shown in the fi gure.
3. Attach and turn the
cover according to
the arrow.
sary (on left and right sides).
(b)
(a)
Rubber ring