Remote Control Configuration; Remote Programming; Remote Pairing - Viper 4806V Owner's Manual

Remote Control Configuration
The remote controls have operations that can be configured to a user's
personal preferences. The following instruction directs you through the
available configuration and programing options for the remote con-
trol.

Remote Programming

To Enter Programming: Press and hold the
the transmit LED turns on to indicate the Main Menu is accessed.
To Exit Programming: Press and release the
and hold the

Remote Pairing

Remote pairing is a process where the remote, and the in-vehicle sys-
tem learn the other's encrypted identification, securing communication
between the two from intruders.
The following instructions step you through the remote pairing opera-
tion of the Responder LE 2-way or 1-way companion remote control.
Prepare the vehicle system for pairing:
Turn the key to the ON position.
1.
Within 5 seconds press and release 1 time the Control button on
2.
the Control Center.
Within 5 seconds, press and hold the Control button. The status
3.
LED will flash one time and the horn (if connected) honks once to
confirm the system is ready for remote pairing.
Release the Control button and proceed to next step.
4.
Prepare the remote control for pairing:
5. Enter programming by pressing and holding the
seconds to access the Main Menu.
© 2013 Directed. All rights reserved.
button again until the transmit LED shuts off.
button for 8 seconds,
button once then press
button for 8
15