Executive Override; External Paging With Meet Me; Forced Account Code - NEC Univerge SV8300 User Manual

1.

Executive Override

This feature allows selected users to override a busy
condition on a called station. A warning tone is
transmitted to both stations in the busy call before the
busy condition is overridden, and a three-party
Conference is then established.
1. When busy tone is heard, press the FLASH key
(or momentarily press the hookswitch) and
receive feature dial tone.
2. Dial the Executive Override feature access code.
A warning tone is transmitted to both parties.
3. The station is now bridged into a three-party
Conference.

External Paging with Meet Me

This feature allows a station user or attendant dial-
access to local voice paging equipment and connects
both parties automatically after the paged party has
answered the page by dialing an access code.
To page:
1. The calling station dials External Paging feature
access code and receives continuous ringback
tone for 1 second.
2. The calling station pages desired party.
3. The calling station remains off-hook or hangs up.
To answer:
1. The paged party dials the Meet-Me access code.
2. The paged party is immediately connected to the
calling party.
From any station (Delay operation):
1. The paged party dials Meet-Me access code.
2. The party paged receives ringback tone.
3. The calling station rings.
4. The calling station goes off-hook and is
immediately connected to the paged party.

Forced Account Code

This feature forces the user to enter an Account Code
(up to 8 or 10 digits) for all outgoing calls. The Account
Code must be dialed before dialing the outgoing
number. Calls are processed only when the dialed
Account Codes are valid.
When dialing an outgoing call:
1. Lift the handset and receive dial tone.
2. Enter the Forced Account Code feature access
code and receive service set tone.
3. Enter the Forced Account Code (up to 8 or 10
digits) and receive dial tone.
4. Dial the desired number.
20