Samsung 4000 User Manual page 18

5. Configuring the Basic Settings with Plug & Play
II II
When you turn the 1V on for the first time, a sequence of prompts and screens will assist you in configuring basic
settings. Before you begin, make sure you have connected the 1V to an antenna or a cable connection and that the 1V
is plugged in. See "Connections" for instructions. To begin Plug and Play, press the POWER button on your remote.
~ Plug & Play is available only when the Input source is set to 1V See "Changing the Input Source".
~
After you press the POWER button, the Start Screen appears. Press the
ENTER OJI button on your remote to continue.
On the Language screen, press the ENTER OJI button. Use the
A I T
buttons to select a language, and then press ENTEROJI again.
~ Move 13 Enter
On the Home Use screen, press ENTER OJI to select the Home Use
mode.
~ Store Demo mode is for retail environments only.
On the Antenna Source screen, select the source of your 1V signal.
Air
If your 1V is connected to an antenna Choose Air, and then press
ENTER OJI. The 1V will automatically start memorizing channels. When it
is done, go to "Set the Clock Mode".
Cable
If your 1V is connected to a cable outlet, choose Cable, and then press
ENTER OJI. Go to "Select the Cable Type".
Auto
~
If you have connected a cable or If you choose Auto, and then press ENTER OJI, the 1V will automatically
~~~~~~s~t~~ ;~ ~~t~~n~lin~~~~~~ey~~
select the correct Antenna source. Go to "Select the Cable Type"
will use the box to select channels, press
the Menu (liD) button on your remote to
skip this step.
On the Cable Type screen, use the ~~~!A IT buttons to select the type
of digital and analog cable systems you have: STD, HAC, or IRC. Most
systems are STD (Standard). When done, select Start, and then press
ENTER OJI. The 1V will start memorizing channels.
~ Channel memorization can take up to 45 minutes, depending on
your cable system.
~
Memorized channels are added to the Added Channel list. These are
the channels you will see when you use the Channel buttons on your
remote.
-5-
7. Accessing and Using the Main Menu
II II
Your 1V's Main menu contains functions that let you control many of the 1V's features. For example, in the Main menu
you can change the size and configuration of the picture, its brightness, its contrast and so on. There are also functions
that let you control the 1V's sound, channel configuration, energy use, and a host of other features. To access the main,
on-screen menu, press the MENU (liD) button on your remote.
To use the Main menu, press the A/T buttons to move between the main option categories: Picture, Sound, Channel,
etc. Each time you press a
AIT
button, the main category name on the left side of the menu changes.
To select a menu option in one of the categories, press the ~ button or the ENTER OJI button. Press it again or press
ENTER OJI to see the values or choices associated with that option. Usually, you would then press ENTER OJI to select
a value or choice. Press the RETURN button or the ~ button to return to a previous screen or selection.
8. Using the tv•s Controller (Panel Key)
II II
The 1V's Controller, a small joy stick like button on the bottom right side of the 1V, lets you control the 1V without the
remote control.
Power on
Adjusting the
volume
Selecting a
channel
Using the
Function menu
Selecting
Media Play
Selecting the
MENU(IID)
~
F"ootOo moo"
L
jr~~~~~mmmm'
- - - - - - - - = = - - - - ~
I
[lu~
Remote control sensor
Turn the 1V on by pressing the Controller when the 1V is in standby mode.
Adjust the volume by moving the Controller from side to side when the power is on.
Select a channel by moving the Controller backwards and forwards when the power is on.
To view and use the Function menu, press and release the Controller when the power is on. To
close the Function menu, press and release the Controller again.
With the Function menu visible, select MEDIA.P by moving the Controller backwards. The
Media Play main screen appears. Select a media source by moving the Controller back
and forth, and then pressing the Controller.
With the Function menu visible, select the MENU (liD) by moving the Controller to the left. The
OSD (On Screen Display) Menu appears. Select an option by moving the Controller to the right.
Move the Controller to the right or left, or backwards and forwards to make additional selections.
To change a parameter, select it, and then press the Controller.
- 7-
Press ENTER OJI and select Auto or Manual, and then press ENTER OJI
again.
If you selected Auto:
The 1V will automatically download the correct time from a digital channel.
The DST (Daylight Savings Time) screen will appear. Press ENTER OJI.
Select On if you want to turn the DST adjustment on and off manually.
Select Off to turn off the DST adjustment. Select Auto if you want the TV
to adjust to DST automatically. Press ENTER (Jll when done.
The Time Zone screen will appear. Use the
A/ T
button to select your
Time Zone, and then press ENTER OJI.
If you selected Manual:
The Clock Set screen appears. Use the AIT buttons to change the
values in each field or use the number buttons to enter the values directly.
Use the ~/~/buttons to move from field to field. When done with all the
fields, press ENTER OJI.
...v
See the best way to connect a cable or satellite box for the highest quality HD pictures. Press the ENTER OJI button to
close the guide.
Press the ENTER OJI button.
~ To set or unset Store Demo mode outside of Plug & Play, press and release the Controller when the power is
on. The Function menu screen appears. Push the Controller to the left (to MENU (liD)) and hold for more than 5
seconds. The Store Demo mode is set. To cancel Store Demo, bring up the Function menu using the Controller,
push the Controller to the right (to Source(-EJ)) and hold for more than 5 seconds.
6. Changing the Input Source
II II
Source
List
When you are watching 1V and you want to watch a movie on your DVD player or Blu-ray player or switch to your cable
box or STB satellite receiver, you need to change the Source.
1. Press the SOURCE button on your remote.
2. Use the
A/T
buttons to select an external input source.
.TV I AV I Component I HDMI11DVI I HDMI2
~ You can only choose external devices that are connected to the TV. In the Source List, connected inputs are
highlighted.
How to Use Edit Name
Edit Name lets you associate a device name to an input source. To access Edit Name, press the TOOLS button when
the Source List is displayed The following selections appear under Edit Name:
.Video I DVD I Cable STB I Satellite STB I PVR STB I AV Receiver I Game I Camcorder I PC I DVI PC I DVI/
TV I IPTV I Blu-ray I HD DVD I DMA: Select the name of the device connected to specific input jacks to make your
input source selection easier.
~ If you connect a PC to the HDMIIN 1 (DVI) port with an HDMI cable, assign PC to HDMI1 in Edit Name.
~
If you connect a PC to the HDMIIN 1 (DVI) port with an HDMI to DVI cable, assign DVI PC to HDMI1 in Edit
Name.
~ If you connect an AV device to the HDMIIN 1 (DVI) port with an HDMI to DVI cable, assign DVI to HDMI1 in Edit
Name.
Selecting
a
Source(£])
Power Off (C))
-6-
With the Function menu visible, open the Source List (-El) by pushing the Controller to the
right. The Source List screen appears. To select a source, move the Controller back and forth.
When the source you want is highlighted, press the Controller.
With the Function menu visible, select Power Off (C)) by pulling the Controller forwards, and
then press the Controller.
~ To close the Menu, Media Play List, or Source List, press the Controller for more than 1 second.
~ When selecting the function by moving the controller to the up/down/left/right directions, be sure not to press the
controller. If you press it first, you cannot operate it to move the up/down/left/right directions.
9. Important Safety Information
Ill
Caution: Pulling, pushing,
or
climbing onto the TV may cause the TV to fall. In particular, ensure that your
children do not hang over or destabilize the 1V Doing so may cause
the
TV to tip over, resulting in serious
injuries
or
death. Follow all safety precautions provided on the included Safety Ryer.
10. Questions? Comments?
Ill
Contact SAMSUNG WORLDWIDE
If you have any questions or comments about your Samsung 1V, please contact the SAM SUNG customer care center.
55 Standish Court Mississauga
Ontario L5R 482 Canada
1-800-SAMSUNG (726-7864)
-8-
85 Challenger Road
Ridgefield Park, NJ 07660-2112