Canon AW-PS200 User Manual page 6

About Water Leakage
If there is any leakage of water in the All Weather
Case, immediately stop shooting. Thoroughly wipe the
All Weather Case interior and the camera dry. Please
contact your Canon Customer Support Help Desk.
Treat the Waterproof Seal
with
care
• Before you release the Catch after using the All
Weather Case in salty, sandy or gritty environments,
wash the All Weather Case thoroughly with clean,
running tap water to remove any sand or grit. Then
wipe it with a soft, dry cloth. If you wipe the All
Weather Case with sand or grit on it, it may become
scratched. Also, if the All Weather Case is left in
contact with salty seawater, the metal parts may rust.
• To prevent wear on the waterproof seal, apply a thin
coating of grease. Do not use a cloth or paper to
apply the grease, as fibers may stick to the seal.
Apply a small amount (droplet) of grease to your
fingertip, and coat the entire surface of the
waterproof seal taking care not to scratch the
surface.
• A damaged or cracked waterproof seal may cause
the All Weather Case to leak. Please contact your
Canon Customer Support Help Desk.
To ensure that the
All
Weather Case remains
waterproof, it is recommended to replace the
seal once a year. Please contact your Canon
Customer Support Help Desk.
5
•