Reading Of Cycle Faults - lancer 810LX User Manual

CHAPTER 3
WASHING CYCLE LAUNCHING

4.6 READING OF CYCLE FAULTS

After accessing to user menu, you must choose FAULT CYCLES with
buttons to read the 5 last faults.
Accept with
Example :
Change the Ptr value with
the designation the alarm previously tripped. If you select the value "0" you got the last
tripped alarm, if you select the value "-1" you got the last before alarm, etc...
If you press
To quit this menu, press
NU_810-815_LX_ANG_1306
button.
O P E R A T O R
F A U L T Y
F A U L T
O P E N E D
/ / / / / / / / / / / / / / / / 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 + + + + + + + + + + + + + + + +
button, you will get any additional information about the alarm tripping.
button.
M E N U
C Y C L E S
N ° 0 6
D O O R
/ / / / / / / / / / / / / / / / 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 - - - - - - - - - - - - - - - -
and buttons. You could like this read the N° and
44
/ / / / / / / / / / / / / / / / 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 + + + + + + + + + + + + + + + +
/ / / / / / / / / / / / / / / / 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 - - - - - - - - - - - - - - - -
and