Kenwood KDC-X994 Instruction Manual page 91

Fuse (10A)
Wiring harness
(Accessory1)
If no connections are made, do not let the wire come out from
the tab.
Power control wire
(Blue/White)
Motor antenna control wire
(Blue)
Mute control wire (Brown)
Dimmer control wire
(Orange / White)
Steering remote control wire
(Light Blue/Yellow)
FM/AM antenna input
AUX input (Stereo)
R L
Use the mini-plug which is stereo type and
does not have any resistance.
To Kenwood disc changer/ External optional
accessory
⁄
When using the optional power amplifier,
connect to its power control terminal.
P.CONT
Depending on what antenna you are
using, connect either to the control
terminal of the motor antenna, or to the
ANT.
power terminal for the booster amplifier of
CONT
the film-type or short pole type antenna.
Connect to the terminal that is grounded
when either the telephone rings or during
conversation. (KDC-X794/ KDC-MP745U
MUTE
only)
⁄
To car light control switch
ILLUMI
To use the steering wheel remote control
feature, an exclusive remote adapter (not
REMOTE CONT
supplied) that matches your car is required.
STEERING WHEEL
REMOTE INPUT
Rear output
R L
Front output
Sub Woofer output
To connect these leads, refer to the
relevant instruction manuals.
To connect the Kenwood navigation
system, consult your navigation
manual.
English | 13