Backyard WESTON 65113 Owner's Manual
  1. Manuals
  2. Brands
  3. Backyard Manuals
  4. Swing Set
  5. WESTON 65113
  6. Owner's manual

Backyard WESTON 65113 Owner's Manual

Wooden swing set
Hide thumbs
Table of Contents

Advertisement

Quick Links

•
• Owner's Manual
•
• Frequently Asked Questions
•
• Assembly Instructions
•

• Warranty Information

Register your new swing set on-line @ www.swingsetsonline.com
(you will also find any updates on assembly instructions and
Features the
Save this assembly manual for future reference in the event that
INS-65113-A-WESTON-Eng 10/08/12
Manufacturer: Backyard Discovery
3001 North Rouse
Pittsburg, KS 66762
1-800-856-4445
information to order replacement parts)
you need to order replacement parts.
WESTON
Wooden Swing Set
Model: # 65113
fastening system.
Made in China

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WESTON 65113 and is the answer not in the manual?

Questions and answers

Related Manuals for Backyard WESTON 65113

Summary of Contents for Backyard WESTON 65113

  • Page 1: Warranty Information

    • Frequently Asked Questions • • Assembly Instructions • • Warranty Information Manufacturer: Backyard Discovery 3001 North Rouse Pittsburg, KS 66762 1-800-856-4445 Register your new swing set on-line @ www.swingsetsonline.com (you will also find any updates on assembly instructions and...
  • Page 2 STOP PARE Missing A Part? CALL US BEFORE GOING BACK TO THE STORE! The store where you made your purchase does not stock parts for this item. If you have assembly questions or if you need parts, whether they are missing or damaged Call Toll-Free Help Line or visit www.swingsetsonline.com ¡LLÁMENOS ANTES DE REGRESAR A LA TIENDA! La tienda donde realizó...
  • Page 3 Owner’s Manual Play Set Dear Customer: Please read entire booklet completely before beginning the assembly process. Equipment is recommended for use by children 3 to 10 years of age. Structures are not intended for public use. The Company does not warranty any of its residential structures subjected to commercial use such as: Daycare, Preschool, Nursery School, Recreational Park, or any similar Commercial Application.
  • Page 4 Owner’s Manual Play Set Please refer to the Assembly section of the Assembly Manual for Maximum Fall Height. Positioning Your Playcenter 1. The Playcenter is designed to be installed on a level surface by an Adult with an Adult helper. Place in a flat area of your yard to minimize ground preparation. 2.

  • Page 5: Operating Instructions

    Owner’s Manual Play Set The following chart explains the fall height in feet from which a life threatening head injury would not be expected Critical Heights in feet (m) of Tested Materials Material Uncompressed Depth Compressed Depth 6" (152mm) 9" (228mm) 12"...

  • Page 6: Maintenance Instructions

    Owner’s Manual Play Set 18. Verify that any suspended climbing ropes, chain, or cable are secured at both ends and that they cannot be looped back on it. 19. Instruct children not to attach items to the playground equipment that are not specifically designed for use with the equipment, such as, but not limited to, jump ropes, clothesline, pet leashes, cables and chain as they may cause a strangulation hazard.
  • Page 7 Third Party Assembly: Customer may, in their sole discretion, elect to use a third party person or service to assemble this product. Backyard Discovery assumes no responsibility or liability for any charge incurred by the Customer for any assembly services’.
  • Page 8 Owner’s Manual Play Set APPENDIX A Information on Playground Surfacing Materials: The following information is from the United States Consumer Product Safety Commission’s Information Sheet for playground surfacing material; also see the following website for additional information: www.cpsc.gov/cpscpub/pubs/323.html. X3. SECTION 4 OF THE CONSUMER PRODUCT SAFETY COMMISSION’S OUTDOOR HOME PLAYGROUND SAFETY HANDBOOK X3.1 Select Protective Surfacing—One of the most important things you can do to reduce the likelihood of serious head injuries is to install shock-absorbing protective surfacing under and around your play equipment.
  • Page 9 Owner’s Manual Play Set The American Society for Testing and Materials takes no position respecting the validity of any parent right asserted in connection with any item mentioned in this standard. Users of this standard are expressly advised that determination of the validity of any such parent rights, and the risk of infringement of such rights, are entirely their own responsibility.
  • Page 10 The stakes provided should be used to secure it firmly to the ground. 2. What size area is recommended for the playset? Backyard Discovery recommends at least a 6’ (six foot) perimeter around and above the playset for maximum safety. 3. What age range is appropriate for the playsets? Backyard Discovery playsets are recommended for children ages 3 –...
  • Page 11 11. The end beam is not straight up and down. Why not? This is normal. Backyard Discovery designs playsets this way to ensure the strongest structure possible. The slight angle adds strength and reduces rocking and twisting.
  • Page 12 Tools Required for Installation: (These are the tools that are generally required for assembly of our outdoor products. These tools are not included with the outdoor product purchase.) (Square) (Level 24") (Tape Measure) (Phillips Screw Driver) (Open End Wrenches 1/2") (Drill Attachments: Phillips Head) (1/8"...
  • Page 13 Basic Setup Dimensions Place the set on level ground, not less than 6 ft [2 m] from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires. 13'-1 9/16" [4 m] 10'-10 3/16" [3.3 m] 6'-0"...

  • Page 14: Parts Identification

    Parts Identification Wood Components (NOT TO SCALE) E1 - UPRIGHT - W103800 1 3/8"x3 3/8"x81 3/4" (36x86x2076) E2 - UPRIGHT - W103807 1 3/8"x3 3/8"x81 3/4" (36x86x2076) E3 - UPRIGHT - W103809 1 3/8"x3 3/8"x81 3/4" (36x86x2076) E4 - UPRIGHT - W103808 1 3/8"x3 3/8"x81 3/4"...
  • Page 15 Parts Identification Wood Components (NOT TO SCALE) H9 - HORIZONTAL TARP SUPPORT - W103818 1"x3 3/8"x54 3/4" (24x86x1392) H10 - SHELF SUPPORT - W103961 1"x3 3/8"x3 3/8" (24x86x86) H73 - ROCK WALL RAIL - W100024 24"x86"x1238" (24x86x1238) H79 - END SUPPORT - W100992 1"x3 1/2"x42"...
  • Page 16 Parts Identification Wood Components (NOT TO SCALE) M2 - BENCH SEAT - W104043 5/8"x3 3/8"x24 3/8" (16x86x618) M3 - FLOOR BOARD - W103824 5/8"x3 3/8"x17 5/8" (16x86x448) M4 - FLOOR BOARD - W103823 5/8"x3 3/8"x22 3/8" (16x86x568) M5 - FLOOR RAIL - W103805 5/8"x3 3/8"x30"...
  • Page 17 Parts Identification Wood Components (NOT TO SCALE) M102 - ATTACHMENT BOARD - W103690 5/8"x3 3/8"x20 1/4" (16x86x514) N1 - WINDOW BOARD - W103828 5/8"x2 3/8"x21 1/2" (16x60x546) SB74 - SWING BEAM EXTENDED - W102419 2"x5 1/4"x89 1/2" (50x134x2274) W71 - SWING BEAM SUPPORT - W102420 2"x3 3/8"x49 5/8"...
  • Page 18 Parts Identification Hardware (95) BR - SCREW PFH 8x1-1/8 - H100088 (84) BP - SCREW PFH 8x1-1/2 - H100086 (26) BS - SCREW PFH 8x1-3/4 - H100089 - T-40 Torx Bit - A100042 (13) CK - SCREW PFH 8x2 - H100111 BT - SCREW PFH 8x2-1/2 - H100090 (26) BW - SCREW PFH 8x3 - H100092...
  • Page 19 Parts Identification Hardware (13) B - NUT BARREL WH 5/16x5/8 - H100004 (11) CM - BOLT WH 5/16x1/2 - H100115 F - BOLT WH 5/16x1 - H100008 (60) D - NUT BARREL WH 5/16x7/8 - H100005 (25) H - BOLT WH 5/16x1-1/2 - H100010 C - NUT BARREL WH 5/16x1-1/2 - H100006 J - BOLT WH 5/16x1-3/4 - H100011 (28)
  • Page 20 Parts Identification Hardware AN - BOLT HEX 5/16x2-3/4 - H100047 AJ - BOLT HEX 5/16x1-1/4 - H100042 A - BOLT FA 3/8x1-1/2 - H100001 (14) CY - SCREW PWH 8x5/8 - H100128 BF - T-NUT 3/8 - H100073 BG - T-NUT 5/16 - H100074 CJ - NUT LOCK 5/16 - H100110...
  • Page 21 Parts Identification Accessories (NOT TO SCALE) FB - SWING SEAT YELLOW - A100070 FA - QUICK LINK - A100069 ES - L BRACKET GREEN 32x51 - A100061 HC - BYD ID TAG (LARGE) 2011 WITH AGES - A100164 GD - L BRACKET 66x66x127 - A100140 TC - SWING BEAM EXTENSION BRACKET-RIGHT - A100326 TB - SWING BEAM EXTENSION BRACKET-LEFT - A100325 EM - SLIDE BED 8' YELLOW - A100056...
  • Page 22 Parts Identification Accessories (NOT TO SCALE) EA - HAND GRIP YELLOW PLASTIC - A100043 ER - CLIMBING ROCK GREEN SMALL - A100060 TN - TRAPEZE WITH HARDWARE YELLOW - A100334 WT - TARP .4x752x2309 - A100398 KN - CHAIN GREEN 31" - A100177 EZ - CHAIN GREEN 51.25"...
  • Page 23 SB74 - SWING BEAM EXTENDED - W102419 2"x5 1/4"x89 1/2" (50x134x2274) GD - L BRACKET 66x66x127 - A100140 TC - SWING BEAM EXTENSION BRACKET-RIGHT - A100326 TB - SWING BEAM EXTENSION BRACKET-LEFT - A100325 4 FT GREEN EXTENDED SWING BEAM WITH TRAPEZE BOLT WH 5/16x1-3/4...
  • Page 24 E77 - ANGLE BRACE - W100991 W71 - SWING BEAM SUPPORT - W102420 1 3/8"x3 3/8"x74 3/8" (36x86x1890) 2"x3 3/8"x49 5/8" (50x86x1260) H79 - END SUPPORT - W100992 H80 - GROUND BOARD - W100990 1"x3 1/2"x42" (24x86x1072) 1"x3 3/8"x87 3/8" (24x86x2218) STEP 2 ATTACH H80 GROUND BOARD TO (2) E77 ANGLED SUPPORT BOARDS USING 2"...
  • Page 25 STEP 3 INSERT W71 BOARD INTO TB AND TC BRACKET OPENING AND SECURE USING 1-3/4" BOLTS AND 7/8" BARREL NUTS, AS BOLT WH SHOWN. 5/16x1-3/4 BOLT WH 5/16x2-1/2 INSERT 2-1/2" BOLTS, LOCK WASHERS AND 1-1/2" BARREL NUTS INTO THE EDGE OF W71 BOARD, AS SHOWN.
  • Page 26 STEP 4 INSERT (6) SWING HANGER QUICK LINK INTO SB74 SWING BEAM USING SAFETY NUT LOCK 5/16 WASHERS, FLAT WASHERS AND 5/16" LOCK NUTS, AS SHOWN. WASHER FLAT 8x27 SB74 WASHER SAFETY 17x30 SWING HANGER QUICK LINK SB74...
  • Page 27 4' Rock Ladder Phase 1 Phase Notes • Assemble slats to rails as shown. • Note oreintation of slats, be sure to arrange as shown. • See drawing below for slat spacing on rails. • Using slats as a guide, pre-drill top edges of rails with a 1/8"...
  • Page 28 4' Rock Ladder Phase 2 & 3 Phase Notes BOLT FA • Oreint top edge of rocks with top edge of slats. 3/8x1-1/2 • Fasten rocks as shown. SCREW PFH 8x1-1/8 T-NUT 3/8 BOLT FA 3/8x1-1/2 (6 PLCS) CLIMBING ROCK GREEN SMALL (6 PLCS) T-NUT 3/8 (6 PLCS)
  • Page 29 8 FOOT SLIDE ASSEMBLY PHASE 1 STEP 1 PLACE SLIDE BRACE CENTERED ON THE BOTTOM 1/4" FROM THE EDGE. TRANSFER HOLES ON THE BOARD THROUGH THE SLIDE BED AS SHOWN BELOW. USE A 3/8" DRILL BIT. ATTACH SLIDE BRACE TO SLIDE USING HARDWARE SHOWN. DESCRIPTION SLIDE BRACE BOLT WH 5/16x1/2...
  • Page 30 8 FOOT SLIDE ASSEMBLY PHASE 2 STEP 2 PLACE 1 SLIDE RAIL ON A FLAT SURFACE AND BEGIN INSERTING SLIDE BED AT THE BOTTOM OF THE SLIDE RAIL (FIG. 1). PUT SLIDE SUPPORT BOTTOM INTO THE SUPPORT POCKET AT THE BOTTOM OF THE RAIL AND HAVE A HELPER BEND THE SLIDE BED TOWARDS THE TOP OF THE SLIDE AND INSERT THE BED INTO THE SLIDE CAVITY.
  • Page 31 K6 - DECORATIVE WALL BOARD - W103829 E1 - UPRIGHT - W103800 5/8"x5 1/4"x30 3/4" (16x134x780) 1 3/8"x3 3/8"x81 3/4" (36x86x2076) E3 - UPRIGHT - W103809 K5 - WINDOW ARCH BOARD - W103811 K3 - GROUND BOARD - W103801 1 3/8"x3 3/8"x81 3/4" (36x86x2076) 5/8"x5 1/4"x30 3/4"...
  • Page 32 E2 - UPRIGHT - W103807 H9 - HORIZONTAL TARP SUPPORT - W103818 1 3/8"x3 3/8"x81 3/4" (36x86x2076) 1"x3 3/8"x54 3/4" (24x86x1392) E4 - UPRIGHT - W103808 M8 - WALL RAIL - W103813 K4 - WALL RAIL - W103810 5/8"x3 3/8"x30 3/4" (16x86x780) 1 3/8"x3 3/8"x81 3/4"...
  • Page 33 K1 - GROUND BOARD - W103803 5/8"x5 1/4"x30" (16x134x762) STEP 3 LAG SCREW WH 5/16x2 WASHER LOCK EXT 8x19 WASHER LOCK EXT 8x19 (4 PLCS) LAG SCREW WH 5/16x2 LAG SCREW WH 5/16x2 (4 PLCS) (4 PLCS) WASHER LOCK EXT 8x19 (4 PLCS)
  • Page 34 M5 - FLOOR RAIL - W103805 K2 - ARCH BOARD - W103812 5/8"x3 3/8"x30" (16x86x762) 5/8"x5 1/4"x30" (16x134x762) STEP 4 LAG SCREW WH 5/16x2 WASHER LOCK EXT 8x19 LAG SCREW WH 5/16x2 (4 PLCS) WASHER LOCK EXT 8x19 (4 PLCS) LAG SCREW WH 5/16x2 (2 PLCS) WASHER LOCK EXT 8x19...
  • Page 35 M6 - FLOOR RAIL - W103806 K2 - ARCH BOARD - W103812 5/8"x3 3/8"x30" (16x86x762) 5/8"x5 1/4"x30" (16x134x762) STEP 5 T-NUT 5/16 (2 PLCS) LAG SCREW WH 5/16x2 WASHER LOCK EXT 8x19 T-NUT 5/16 LAG SCREW WH 5/16x2 (4 PLCS) WASHER LOCK EXT 8x19 (4 PLCS) LAG SCREW WH 5/16x2...
  • Page 36 F71 - STANDARD ANGLE BRACE - W100689 1 3/8"x2 3/8"x13" (36x60x330) STEP 6 BOLT WH 5/16x1-1/2 LAG SCREW WH 5/16x2 WASHER LOCK EXT 12x19 WASHER LOCK EXT 8x19 NUT BARREL WH 5/16x7/8 NUT BARREL WH 5/16x7/8 (2 PLCS) WASHER LOCK EXT 12x19 (2 PLCS) WASHER LOCK EXT 8x19 (2 PLCS)
  • Page 37 F71 - STANDARD ANGLE BRACE - W100689 1 3/8"x2 3/8"x13" (36x60x330) STEP 7 BOLT WH 5/16x2 LAG SCREW WH 5/16x2 WASHER LOCK EXT 8x19 BOLT WH 5/16x2 (2 PLCS) WASHER LOCK EXT 8x19 (2 PLCS) WASHER LOCK EXT 8x19 (2 PLCS) LAG SCREW WH 5/16x2 (2 PLCS)
  • Page 38 M9 - FLOOR BOARD - W103822 5/8"x3 3/8"x31 1/4" (16x86x794) (2) FP1 - FLOOR PANEL - W103821 STEP 8 SCREW PFH (36) 8x1-1/2 SCREW PFH 8x1-1/2 (36 PLCS)
  • Page 39 M3 - FLOOR BOARD - W103824 5/8"x3 3/8"x17 5/8" (16x86x448) STEP 9 SCREW PFH (28) 8x1-1/8 INSIDE VIEW SCREW PFH 8x1-1/8 (14 PLCS) SCREW PFH 8x1-1/8 (14 PLCS) OUTSIDE VIEW USING A 1/8" DRILL BIT, DRILL DESIGNATED HOLES THROUGH 'M3' BOARDS. REFERENCE VIEW...
  • Page 40 H10 - SHELF SUPPORT - W103961 K7 - LEMONADE SHELF - W103825 1"x3 3/8"x3 3/8" (24x86x86) 5/8"x5 1/4"x27 7/8" (16x134x708) STEP 10 SCREW PFH 8x1-1/2 SCREW PFH 8x2-1/2 SCREW PFH 8x2-1/2 (2 PLCS) SCREW PFH 8x1-1/2 (5 PLCS)
  • Page 41 M11 - ANGLE BRACE - W103826 M8 - WALL RAIL - W103813 5/8"x3 3/8"x56 3/8" (16x86x1431) 5/8"x3 3/8"x30 3/4" (16x86x780) STEP 11 BOLT WH 5/16x1 BOLT WH 5/16x2-1/4 WASHER LOCK EXT 8x19 WASHER LOCK EXT 12x19 NUT BARREL WH 5/16x7/8 (2 PLCS) WASHER LOCK EXT 12x19 NUT BARREL...
  • Page 42 M4 - FLOOR BOARD - W103823 5/8"x3 3/8"x22 3/8" (16x86x568) STEP 12 SCREW PFH (28) SCREW PFH 8x1-1/8 8x1-1/8 (14 PLCS) SCREW PFH 8x1-1/8 (14 PLCS) 1 13/16" REFERENCE VIEW...
  • Page 43 M8 - WALL RAIL - W103813 5/8"x3 3/8"x30 3/4" (16x86x780) STEP 13 WASHER LOCK EXT 8x19 BOLT WH 5/16x1-1/2 NUT BARREL WH 5/16x7/8 WASHER LOCK EXT 12x19 NUT BARREL WH 5/16x7/8 (2 PLCS) WASHER LOCK EXT 12x19 (2 PLCS) WASHER LOCK EXT 8x19 (2 PLCS) BOLT WH 5/16x1-1/2 (2 PLCS)
  • Page 44 M4 - FLOOR BOARD - W103823 5/8"x3 3/8"x22 3/8" (16x86x568) STEP 14 SCREW PFH 8x1-1/8 SCREW PFH 8x1-1/8 SCREW PFH 8x1-1/8 (4 PLCS) (4 PLCS) REFERENCE VIEW...
  • Page 45 M1 - WALL BOARD - W103827 5/8"x3 3/8"x13" (16x86x330) STEP 15 SCREW PFH (10) 8x1-1/8 SCREW PFH 8x1-1/8 (10 PLCS) REFERENCE VIEW...
  • Page 46 N1 - WINDOW BOARD - W103828 5/8"x2 3/8"x21 1/2" (16x60x546) STEP 16 SCREW PFH 8x1-1/8 FLUSH SCREW PFH 8x1-1/8 (7 PLCS) REFERENCE VIEW...
  • Page 47 M10 - END TARP SUPPORT - W103817 5/8"x3 3/8"x31 7/8" (16x86x810) STEP 17 SCREW PFH 8x2 SCREW PFH (4 PLCS) SCREW PFH 8x2 (4 PLCS)
  • Page 48 H7 - VERTICAL TARP SUPPORT - W103819 1"x3 3/8"x35 7/8" (24x86x910) STEP 18 BOLT WH 5/16x1 BOLT WH 5/16x2 WASHER LOCK EXT 12x19 WASHER LOCK EXT 8x19 WASHER LOCK EXT 8x19 NUT BARREL (1 PLC) WH 5/16x7/8 BOLT WH 5/16x2 (1 PLC) WASHER LOCK EXT 8x19 (1 PLC)
  • Page 49 H7 - VERTICAL TARP SUPPORT - W103819 1"x3 3/8"x35 7/8" (24x86x910) STEP 19 WASHER LOCK EXT 12x19 BOLT WH 5/16x1 (1 PLC) BOLT WH 5/16x1-1/2 NUT BARREL WH 5/16x7/8 (1 PLC) WASHER LOCK EXT 12x19 WASHER LOCK EXT 8x19 NUT BARREL WH 5/16x7/8 WASHER LOCK EXT 8x19 (1 PLC)
  • Page 50 M7 - TOP TARP SUPPORT - W103820 5/8"x3 3/8"x30" (16x86x762) STEP 20 SCREW PFH 8x2 (4 PLCS) SCREW PFH...
  • Page 51 WT - TARP .4x752x2309 - A100398 1/64"x29 5/8"x90 7/8" (.4x752x2309) STEP 21 SCREW PWH 8x5/8 SCREW PWH (3 PLCS) 8x5/8 SCREW PWH 8x5/8 (3 PLCS) SCREW PWH 8x5/8 (3 PLCS)
  • Page 52 EA - HAND GRIP YELLOW PLASTIC - A100043 STEP 22 LAG SCREW WH 1/4x1-1/2 WASHER LOCK EXT 6x15 WASHER LOCK EXT 6x15 (4 PLCS) LAG SCREW WH 1/4x1-1/2 (4 PLCS)
  • Page 53 M102 - ATTACHMENT BOARD - W103690 5/8"x3 3/8"x20 1/4" (16x86x514) (1) 4 FT ROCK LADDER STEP 23 WASHER LOCK EXT 12x19 SCREW PFH 8x1-1/2 M102 (2 PLCS) BOLT WH NUT BARREL WH 5/16x5/8 5/16x1 (2 PLCS) WASHER LOCK EXT 12x19 WASHER LOCK EXT 8x19...
  • Page 54 (1) 8 FT SLIDE ASSEMBLY STEP 24 6 5/16" BOLT WH 6 5/16" 1 5/16" 5/16x1/2 1 9/16" WASHER LOCK EXT 12x19 NUT BARREL 4 3/16" WH 5/16x5/8 DRILLING PATTERN BOLT WH 5/16x1/2 (3 PLCS) 8 FT SLIDE ASSEMBLY WASHER LOCK EXT 12x19 (3 PLCS) NUT BARREL WH 5/16x5/8 (3 PLCS)
  • Page 55 (1) 8 FT SLIDE ASSEMBLY HC - BYD ID TAG (LARGE) 2011 WITH AGES - A100164 STEP 25 SCREW PWH 8x5/8 BOLT HEX 5/16x1-1/4 WASHER SPLIT 5/16 WASHER FLAT 8x27 BOLT HEX 5/16x1-1/4 (4 PLCS) WASHER SPLIT 5/16 (4 PLCS) WASHER FLAT 8x27 (4 PLCS) 4 FT SWING BEAM ASSEMBLY...
  • Page 56 FB - SWING SEAT YELLOW - A100070 FA - QUICK LINK - A100069 KN - CHAIN GREEN 31" - A100177 TN - TRAPEZE WITH HARDWARE YELLOW - A100334 EZ - CHAIN GREEN 51.25" - A100068 STEP 26 SWING HANGER QUICK LINK (6 PLCS) LOOSEN NUT AND LIFT EYE BOLT TO...
  • Page 57 H5 - BENCH UPRIGHT - W104041 H6 - BENCH GROUND BOARD - W104042 1"x3 3/8"x11 3/4" (24x86x300) 1"x3 3/8"x18 1/8" (24x86x460) ES - L BRACKET GREEN 32x51 - A100061 STEP 27 NUT BARREL WH 5/16x7/8 BOLT WH 5/16x1/2 (2 PLCS) WASHER LOCK EXT 12x19 (2 PLCS) BOLT WH 5/16x1/2...
  • Page 58 H4 - BENCH SEAT SUPPORT - W104040 M2 - BENCH SEAT - W104043 1"x3 3/8"x6 1/2" (24x86x166) 5/8"x3 3/8"x24 3/8" (16x86x618) STEP 29 SCREW PFH 8x1-3/4 (4 PLCS) SCREW PFH 8x1-3/4 (4 PLCS) SCREW PFH 8x1-3/4 STEP 30 SCREW PFH 8x1-3/4 (4 PLCS) SCREW PFH 8x1-3/4 (4 PLCS)
  • Page 59 (1) BENCH ASSEMBLY STEP 31 BOLT WH 5/16x1/2 WASHER LOCK EXT 12x19 NUT BARREL WH 5/16x5/8 BOLT WH 5/16x1/2 (2 PLCS) NUT BARREL WH 5/16x5/8 (2 PLCS) WASHER LOCK EXT 12x19 (2 PLCS)
  • Page 60 KC - METAL GROUND STAKE BROWN - A100178 Anchoring Instructions STEP 32 BOLT WH 1/4x1/2" NOTE: BOLT WH FAILURE TO USE GROUND STAKES CAN VOID WARRANTY & CAUSE INJURY! 1/4x1" STAKE A WASHER FLAT 9x18 STAKE B WASHER STAKE A LOCK EXT 8x15 SWING...
  • Page 61 Limited Warranty. In addition, Backyard Discovery will replace any parts within the first 30 days from date of purchase found to be missing from or damaged in the original packaging.

Table of Contents