Advertisement
Quick Links
User guide type 35104377
RMB4
User guide, English
OneRemote RMB4 controller installed in a Bang & Olufsen Beo4 remote control.
Operate these devices using the modified Beo4:
Sony KDL-NX700 ... and more
Operate devices that are operate able with RCU's like:
Sony RM-ED031, RM-ED032, RM-ED033, RM-ED034 and RM-ED035.
Advertisement
Related Manuals for One Remote RMB4
Summary of Contents for One Remote RMB4
- Page 1 User guide type 35104377 RMB4 User guide, English OneRemote RMB4 controller installed in a Bang & Olufsen Beo4 remote control. Operate these devices using the modified Beo4: Sony KDL-NX700 ... and more Operate devices that are operate able with RCU’s like:...
-
Page 2: Daily Operation
Beo4 Button Translation table. Daily operation Bravia Sync operation Play OK/ enter press 1 sec. Stop Prog + *1*2 Prog - oAS Rew/ FF *1*2 oDF Next/ Previous Guide *1*2 Return Theatre *1*2 Sync menu Home Exit Digial/ analog Other operations Favorite menu Options AV input... - Page 3 Congratulations With a OneRemote RMB4 controller from www.oneremote.dk built in to your Beo4 remote control, you can fully operate your TV with your Bang & Olufsen remote control terminal. This guide explains how. Refer to the installation section about the initial setup and option programming.
- Page 4 RMB4 controllers are dedicated controllers made for operating a specific product like an Apple iPod docking station, a flat screen TV, a curtain controller etc. The RMB4 controller makes the Beo4 able to operate a third part device, but it is still able to operate any other Bang & Olufsen products.
- Page 5 Operating with OneRemote - OneRemote environment. To be able to operate the device optimal with the Beo4 the user has to be familiar with operations with the original remote control as described in the device’s user manual. The beo4 remote control is not equipped with as many keys as most other brands are using.
-
Page 6: Option Programming
Option programming The OneRemote controller inside the Beo4 can be programmed with different options, to make it fit different setups. One or more options might need to be set to fit your applica- tion. An option programming is carried out by pressing a series of buttons in a sequence that does not occur during daily use. - Page 7 Volume and AAUX option. When the TV is being selected with t the TV automatically powers on. If the A.AUX mode is set, the OneRemote controller will turn on the TV, and also send an AAUX command in B&O format, to an B&O audiomaster. The audiomaster will therefore also turn on and open for it’s AAUX input.
- Page 8 When a video source button on the Beo4 is pressed like T, f , the OneRemote RMB4 controller checks if an option is set for this source. If an option is programmed, it will transmit the corresponding discrete code, otherwise it will be ig-...
- Page 9 Programming discrete source codes. The beo4 source selection buttons can each be a or c programmed to open for a specific input socket on the TV. Programming is done by entering a 5 key code, as examples shown in the table below. Programming is initiated by pressing the source button on the Beo4, that is needed to transmit a discrete code to the TV.
- Page 10 TV Source selection table No change HDMI 1 HDMI 2 HDMI 3 HDMI 4 Video 1 Video 2 Video 3 Component 1 Component 2...
- Page 12 Made in Denmark by www.oneremote.dk 35104377u1uk...
Need help?
Do you have a question about the RMB4 and is the answer not in the manual?
Questions and answers