Page 3
Cypress also makes no commitment to update or to keep current the information contained in this document. Cypress Technology reserves the right to make improvements to this document and/or product at any time and without notice. COPYRIGHT NOTICE...
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
1. INTRODUCTION The 4 by 4 HDMI Matrix with 4K × 2K Support is capable of switching and routing an HDMI signal from any of its four sources to any of four connected HDMI displays, allowing any source to be shown independently on any display.
5. FEATURES • Supports Standard and High Definition resolutions up to 4K×2K (UHD) • Supports up to 7.1 channels of High Definition audio (LPCM, Dolby TrueHD, and DTS-HD Master Audio) • Supports 'Deep Color' up to 1080p/36-bit • Supports Internal/External EDID settings •...
6.1 Front Panel POWER EDID CMPRO-4H4H 4X4 HDMI MATRIX IR Window: Accepts the remote control signal of this Matrix only. POWER Button and LED: Press this button to power the Matrix ON/ OFF. The LED will light up when the power is ON.
6.2 Rear Panel OUTPUT INPUT IR IN RS232 CONTROL POWER DC 5V SERVICE INPUT 1/2/3/4: Connect to HDMI equipped source devices such as DVD/Blu-ray players, set-top boxes or games consoles. OUTPUT A/B/C/D: Connect to an HDMI TVs/displays or monitors for display of the selected source signal.
6.6 RS-232 Commands COMMAND DESCRIPTION A1~A4 Switch Output A to 1~4 B1~B4 Switch Output B to 1~4 C1~C4 Switch Output C to 1~4 D1~D4 Switch Output D to 1~4 ABC...1~ABC...4 Switch Output A B C... to 1~4 at the same time SETIP Setting IP...
6.7 Web GUI Control On a PC/Laptop that is connected to the same active network as the Matrix, open a web browser and type the Matrix's IP address on the web address entry bar (The IP Address can be obtained via RS-232 by using the 'help' command or use the default IP: 192.168.0.1).
Page 13
Click on the 'Setting' tab allows user to reset the IP configuration. The system will ask for a reboot of the Matrix each time any of the settings are changed. The IP address used to access the Web GUI control will also need to be changed on the web address entry bar.
7. CONNECTION DIAGRAM Blu-ray Player Set-top Box Media Player Satellite Receiver HDMI Inputs RS-232 Equipped RS-232 PC or Notebook Power INPUT OUTPUT Supply IR IN RS232 CONTROL POWER DC 5V SERVICE HDMI Outputs Network Smartphone Router or Tablet IR Extender 60°...
Need help?
Do you have a question about the CMPRO-4H4H and is the answer not in the manual?
Questions and answers