Tone Setup; Zone Control - Kenwood KVT-514 Instruction Manual

Audio Control
Tone Setup
You can set a Tone curve.
o
Display the Tone screen
See <Equalizer Control> (page 89).
D
Set the Tone
_~ ~ ~ ~=
11'_ I
OJ
Tone curve becomes flat.
rn
Bass adjustment items are displayed.
W
Middle adjustment items are displayed.
fI]
Treble adjustment items are displayed.
[]] Sets the Center frequency.
[§]
Sets the level.
II]
Sets the
Q
factor. (Only Bass and Middle can
be set)
W
Bass DC Extend settings (Only when Bass is
selected)
If turned "ON", it extends the bass
center frequency to the low register by
approximately 20%.
[]] Returns to the "Equalizer" screen.
90
8
KVT-S14/KVT-S34DVD
Zone Control
You can set the front and rear audio source.
o
Display Zone Control
Touch ....
h9'·i'i"·1 '
in the "Audio
Control Menu" screen (page 88).
OJ
Displays the current source.
D
Set the Zone Control
rn
Turns the Zone Function (that sets different
source sounds for front and rear speakers)
On or Off.
W
Sets the front and rear audio source
separately.
(This button appears when the Zone
function is On.)
~
~
• When the rear speaker sound is switched, the audio
source that is output at the AV OUTPUT terminal is also
switched to the same source.
fI]
Adjusts the volume of the rear channel.
(This button appears when the Zone
function is On.)