Multiple Sequence Cooking - Sharp AX-600X(R) Operation Manual

OTHER CONVENIENT FEATURES

Multiple Sequence Cooking

S U P E R S T E A M C O N V E C T I O N A N D C O N V E C T I O N
There are 2 patterns in Super Steam Convection and
Convection which can be programmed into Multiple
Sequence Cooking.
1 Preheat + Convection (Oven) + Convection (Oven)
2 Preheat + SuperSteam Convection (SuperSteam
Bake/Roast) + Convection (Oven)
‡ Preheat can be omitted.
* Suppose you want to cook in Sequence Cooking with
Preheating in pattern 2 .
1st stage is SuperSteam Bake/Roast, at 160°C for 1
hour and 10 minutes.
2nd stage is Convection Oven, at 230°C for 10
minutes.
PROCEDURE
For 1st stage, follow the steps 1 to 5 in
1
SuperSteam Bake/Roast. See page E-15.
2
Press Convection to
program the second stage.
Turn the Knob to enter
3
the desired temperature
230°C and press Enter.
4
Turn the Knob to enter the
desired cooking time 10
minutes.
5
Press START .
MICROWAVE
Your oven can be programmed for up to 4 automatic
cooking sequences, switching from one power level
setting to another automatically. Sometimes cooking
directions tell you to start on one power level and then
change to a different power level.
‡ Suppose you want to cook for 5 minutes at 30% and
then continue to cook for 30 minutes at 50%.
PROCEDURE
For 1st stage, follow the steps 1 to 3 in
1
manual microwave cooking. See page E-20.
2
Press Microwave to
program the second stage.
3
Turn the Knob to enter
cooking time 30 minutes
and press Enter to
proceed.
4
Turn the Knob to select
power level 50%.
5
Press START.
E – 22