MyBinding IDEAL 5221-95EP Instruction Manual

Mbm triumph 6550-ep hydraulic paper cutter

Hide thumbs

page of 49

/ 49
Bookmarks

Quick Links

Download this manual

MBM Triumph

6550-EP Hydraulic

Paper Cutter

Instruction Manual

Provided By

http://www.MyBinding.com

http://www.MyBindingBlog.com

Need help?

Do you have a question about the IDEAL 5221-95EP and is the answer not in the manual?

Questions and answers

Summary of Contents for MyBinding IDEAL 5221-95EP

Page 1 MBM Triumph 6550-EP Hydraulic Paper Cutter Instruction Manual Provided By http://www.MyBinding.com http://www.MyBindingBlog.com...
Page 2 Guillotines GB Operating Instructions IDEAL 4850-95 IDEAL 4810-95 IDEAL 4850-95EP IDEAL 4810-95EP IDEAL 5221-95EP IDEAL 6550-95EP...
Page 3 • • Ìåðû ïðåäîñòîðîæíîñòè Środki bezpieczeństwa IDEAL 4810-95/EP • IDEAL 4850-95/EP • IDEAL 5221-95EP • IDEAL 6550-95EP Bitte lesen Sie vor Inbetriebnahme der Maschine unbedingt diese Betriebsanleitung und beachten Sie die Sicherheitshinweise. Die Betriebsanleitung muss jederzeit verfügbar sein. Please read these operating instructions before putting the machine into operation and observe the safety precautions.
Page 4 • • • Sicherheitshinweise Safety precautions • • • Consignes de sécurité Veiligheidsvoorschriften • • • Misure di Sicurezza Normas de Seguridad • • • • Säkerhetsföreskrifter Turvallisuusohjeita Sikkerhetsforskriftene • • • Ìåðû ïðåäîñòîðîæíîñòè Środki bezpieczeństwa Keine Bedienung durch Kinder! GB Children must not operate the machine! Pas d‘utilisation par un enfant! Geen bediening door kinderen!
Page 5 Sikkerhetsforskriftene • • • Ìåðû ïðåäîñòîðîæíîñòè Środki bezpieczeństwa IDEAL 4810-95/EP • IDEAL 4850-95/EP • IDEAL 5221-95EP • IDEAL 6550-95EP Messer nie lose liegen lassen! Messer nur mit Messerwechselvorrichtung oder im Messertransportkasten befördern! (siehe Seite 31 und 33). Warnung! Verletzungsgefahr! GB Never leave the blade unattended! Do not extract or transport the blade without protection! (See page 31 and 33).
Page 6 • • • Sicherheitshinweise Safety precautions • • • Consignes de sécurité Veiligheidsvoorschriften • • • Misure di Sicurezza Normas de Seguridad • • • • Säkerhetsföreskrifter Turvallisuusohjeita Sikkerhetsforskriftene • • • Ìåðû ïðåäîñòîðîæíîñòè Środki bezpieczeństwa DK Knivbladet må aldrig efterlades uden opsyn. Forsøg ikke at afmontere eller transportere knivbladet uden beskyttelse! (Se side 31 og 33) FARE! Risiko for legemlig beskadigelse.
Page 7 • Ìåðû ïðåäîñòîðîæíîñòè Środki bezpieczeństwa IDEAL 4810-95/EP • IDEAL 4850-95/EP • IDEAL 5221-95EP • IDEAL 6550-95EP Keine harten und splitternden Materialien schneiden! GB Do not cut hard materials or materials which may splinter! La coupe de matériaux trop durs ou risquant des projections...
Page 8 Safety precautions • • The machine is designed for cutting stacks of paper to a specified size. This machine is constructed for "one-man operation" only! Disconnect from the mains before starting any service work or before removing the panels! Replacement of blade and cutting stick may be performed only when the main switch is switched off! - 7 -...
Page 9 Safety precautions • • IDEAL 4810-95/EP • IDEAL 4850-95/EP • IDEAL 5221-95EP • IDEAL 6550-95EP All components which could endanger the operator are covered by a guard! Operating the machine without safety device is forbidden! (Front safety guard (A), rear screwed safety guard (B) and panel (C).
Page 10 Safety precautions • • The dangerous cutting movement is safeguarded by a movable guard (A) and a safety two-handed control system! (B) Before working with the machine and after every blade replacement the automatic cut-off function of safety guard (A),(correct if distance between cover and table is <...
Page 11 Safety precautions • • IDEAL 4810-95/EP • IDEAL 4850-95/EP • IDEAL 5221-95EP • IDEAL 6550-95EP Protect mains cable against heat, oil and sharp edges! Connect the power cord to a single phase 230V / 10A min socket. 115V / 15A min...
Page 12 Safety precautions • • When not in use for a longer period switch off. (Main switch to "0"). - 11 -...
Page 13 Installation • • IDEAL 4810-95/EP • IDEAL 4850-95/EP • IDEAL 5221-95EP • IDEAL 6550-95EP Only IDEAL 4810/EP IDEAL 4850/EP IDEAL 6550EP Remove the stand from the wooden pallet. Only IDEAL 4810/EP IDEAL 4850/EP IDEAL 6550EP 4 strong people are required to lift the machine from the pallet and place it on the stand.
Page 14 Installation • • IDEAL 5221-95EP The machine is delivered ready for operation. 4 strong people are required to lift the machine from the pallet. Side tables, left and right, (A) are available as accessories. Attach the side tables to the front table so that the upper surface is level.
Page 15 Installation • • IDEAL 4810-95/EP • IDEAL 4850-95/EP • IDEAL 5221-95EP • IDEAL 6550-95EP Only IDEAL 4810-95/EP Attach the enclosed hand-wheel for clamping. Parts and tools are in the tool set (C). Plug into socket. The machine must be connected directly to the socket.
Page 16 Operation • • It is forbidden to operate the machine if the operating and safety instructions have not been understood. Please check the safety devices are functioning and complete before use. • All covers have to be mounted (A). • The release for cutting is allowed only if the cover is closed and the two-hand safety device is operated at the same time (B)
Page 17 Operation • • IDEAL 4810-95/EP • IDEAL 4850-95/EP • IDEAL 5221-95EP • IDEAL 6550-95EP Position the main switch to "I" (A). Insert the key for the control system and move it to the right (B). Open the safety guard (C). The machine is now ready for use.
Page 18 Operation • • IDEAL 4810-95EP, IDEAL 4850-95EP, IDEAL 5221-95EP, IDEAL 6550-95EP The measurement is set either with the hand- wheel (A) or by programming (B) the cutting measurements. Measurement is shown on the display in inches or cm (B). Only IDEAL 4810-95EP If display shows "...
Page 19 Operation • • IDEAL 4810-95/EP • IDEAL 4850-95/EP • IDEAL 5221-95EP • IDEAL 6550-95EP Optical cutting line (A) that indicates the exact position of the cut. Blade cuts on the front edge (B) of the light beam. (Only use when no exact cut is required).
Page 20 Operation • • Position the paper on the backgauge (A) and side lays left or right (B). To move paper stacks, please use the paper knock-up block (C) provided. (Run backgauge to the front for turning the paper stack). - 19 -...
Page 21 Operation • • IDEAL 4810-95/EP • IDEAL 4850-95/EP • IDEAL 5221-95EP • IDEAL 6550-95EP IDEAL 4850-95/EP, IDEAL 5221-95EP IDEAL 6550-95/EP The clamp moves automatically when cutting is activated. The paper can also be pressed in advance. Clamping and cutting is activated by pressing button (A) on the front table.
Page 22 Operation • • Close the safety guard. Cutting activation: Press both buttons of the two-handed control system activation (A) simultaneously and them pressed until the paper is completely cut. To interrupt or stop cutting: To interrupt or stop cutting, release both buttons (A) of the two-hand control.
Page 23 Operation • • IDEAL 4810-95/EP • IDEAL 4850-95/EP • IDEAL 5221-95EP • IDEAL 6550-95EP Operating elements - Front safety guard - Safety two-handed control system Pre-clamping and cutting - Overload switch (blade drive/clamp drive/ backgauge drive) - Backgauge control (EP)
Page 24 IDEAL 4810-95/EP = 45 cm, 17,72 inches IDEAL 4850-95/EP = 45 cm, 17,72 inches IDEAL 5221-95EP = 52 cm, 20,47 inches IDEAL 6550-95/EP = 61 cm, 24,02 inches Warning! Before storing or cutting a measurement please check if the correct measurement scale (cm or inch) see above is stored.
Page 25 Operation • • IDEAL 4810-95/EP • IDEAL 4850-95/EP • IDEAL 5221-95EP • IDEAL 6550-95EP Only EP machines. • The further the hand-wheel is turned to the right, the quicker the backgauge moves. If the hand-wheel is turned to the left the backgauge will return quicker.
Page 26 Operation • • Programming Only IDEAL 4810_95EP, IDEAL 4850-95EP, IDEAL 5221-95EP, IDEAL 6550-95EP This control system enables you to store 9 programs with 9 programmable steps. One step represents one measurement. After entering the program numbers you are able to...
Page 27 Operation • • IDEAL 4810-95/EP • IDEAL 4850-95/EP • IDEAL 5221-95EP • IDEAL 6550-95EP Programming of multiple cut dimension • Press appears on the display. • Enter program number 1 ... 9. First figure on display = program number. Second figure = program step.
Page 28 Operation • • Working with programs • Press appears on the display • Enter program number 1 ... 9 With the button you are able to change between several program steps. With the backgauge moves to the indicated dimension. With the backgauge stops.
Page 29 Blade and cutting stick replacement • • IDEAL 4810-95/EP • IDEAL 4850-95/EP • IDEAL 5221-95EP • IDEAL 6550-95EP If the cutting quality decreases: • Check the cutting depth (see page 36). • Check the cutting stick (see page 32). •...
Page 30 Blade and cutting stick replacement • • Turn the blade depth adjustment screw to the left until it stops. (Screwdriver found in tool set (A). Close the safety guard (1.). Lower the blade by pressing both cutting buttons (2.). Keep one button pressed and turn off the main switch (3.).
Page 31 Blade and cutting stick replacement • • IDEAL 4810-95/EP • IDEAL 4850-95/EP • IDEAL 5221-95EP • IDEAL 6550-95EP The 3 eccentrics are now exposed and should be turned counter clockwise to position "0" with the special wrench and attachable extension pipe (A) (in the tool set). The slot must correspond to position "0"...
Page 32 (3.). Remove 2 blade screws (1.) IDEAL 4810-95/EP, IDEAL 4850-95/EP and 3 blade screws (1.) IDEAL 5221-95EP, IDEAL 6550-95EP. Loosen the grips (2.) of the blade changing tool (A) lightly and allow the blade to be taken downwards out of the machine (3.).
Page 33 Blade and cutting stick replacement • • IDEAL 4810-95/EP • IDEAL 4850-95/EP • IDEAL 5221-95EP • IDEAL 6550-95EP Take out the cutting stick with a small screw- driver. If needed the cutting stick can be turned or exchanged. (The cutting stick can be used eight times).
Page 34 Blade and cutting stick replacement • • Take the exchange blade carefully out of the blade box and screw it to the blade changing tool (A) • Make sure there is a space ot 11 mm or 0.43 inches! (B). •...
Page 35 Blade and cutting stick replacement • • IDEAL 4810-95/EP • IDEAL 4850-95/EP • IDEAL 5221-95EP • IDEAL 6550-95EP Lightly tighten 3 (IDEAL 4810-95/EP, IDEAL 4850-95/EP has 2) of the 5 blade screws with washers (1.). Remove the blade changing tool (2.). Lightly tighten the remaining blade screws with washers (3.).
Page 36 Blade and cutting stick replacement • • Close the safety guard (1.) Lower the blade by pressing both cutting buttons (2.). Keep one button pressed and turn off the main switch (3.). Open the safety guard (4.). With the special wrench (B) the 3 eccentrics should be screwed down (5.)until the paper is cut along the entire length of the blade (The blade must...
Page 37 Blade and cutting stick replacement • • IDEAL 4810-95/EP • IDEAL 4850-95/EP • IDEAL 5221-95EP • IDEAL 6550-95EP Paper cutting test. If the last sheet or several sheets are not completely cut, gradually turn the knob for blade depth adjustment (A) ¼...
Page 38 Maintenance and cleaning • • Maintenance work may only be performed by trained staff. Danger! Disconnect the mains before starting any service work or before removing the cover. Grease the backgauge (A) control weekly with a grease gun. Advance the backgauge as far as possible to the front.
Page 39 Maintenance and cleaning • • IDEAL 4810-95/EP • IDEAL 4850-95/EP • IDEAL 5221-95EP • IDEAL 6550-95EP Safety test The safety regulations are according to the regulations of the country where the cutting machine is operated. The manufacturer recommends a safety check is made every 5 years by an authorised service team.
Page 40 Possible malfuntions • • Machine does not function! Is the machine plugged in? Main switch to position "I"? (A) Control system activated? (B) (Turn key to the right) Release a cut see page 21. - 39 -...
Page 41 Possible malfuntions • • IDEAL 4810-95/EP • IDEAL 4850-95/EP • IDEAL 5221-95EP • IDEAL 6550-95EP Cut cannot be made. • If cover is open: close it. • If cover is closed: open and re-close it. (Security check). - 40 -...
Page 42 Machine blocked. • Blade is blunt. Eliminate the cause, and push the safety button (A). Only IDEAL 4810-95EP, IDEAL 4850-95EP IDEAL 5221-95EP, IDEAL 6550-95EP • Backgauge blocked A, B Safety button (B) ejects. Eliminate the cause, and push the safety button (B).
Page 43 Possible malfuntions • • IDEAL 4810-95/EP • IDEAL 4850-95/EP • IDEAL 5221-95EP • IDEAL 6550-95EP Does not cut through the last sheet: • Turn or turn around the cutting stick (A), readjust the blade by means of the blade adjusting knob (B) (see page 36).
Page 44 Possible malfuntions • • Motor runs but blade does not move downwards. • Security brake has been activated! Inform the Service Team! www.ideal.de "Service" IDEAL service@krug-priester.com "Service" Display illumination off • Machine is plugged in? (A) • Main switch on position "I"? (B) •...
Page 45 Possible malfuntions • • IDEAL 4810-95/EP • IDEAL 4850-95/EP • IDEAL 5221-95EP • IDEAL 6550-95EP IDEAL 4810-95EP, IDEAL 4850-95EP, IDEAL 5221-95EP, IDEAL 6550-95EP Cut cannot be made. • Measurement has not been reached correctly. • LED "S" does not turn off.
Page 46 Recommended accessories: Blade • Nr. 9000 021 IDEAL 4810-95/EP • Nr. 9000 021 IDEAL 4850-95/EP • Nr. 9000 130 IDEAL 5221-95EP • Nr. 9000 025 IDEAL 6550-95/EP Cutting stick (6 pieces) • Nr. 9000 022 IDEAL 4810-95/EP • Nr. 9000 022 IDEAL 4850-95/EP •...
Page 47 Technical data • • IDEAL 4810-95/EP • IDEAL 4850-95/EP • IDEAL 5221-95EP • IDEAL 6550-95EP Technical data: • Power supply: 230V/50Hz/1~,115V/60Hz/1~ • Cutting length: mm, 520 mm, 650 1,2,3,4 • Cutting height: 80 mm • Table depth: 458 mm, 450...
Page 48 EG-KONFORMITÄTSERKLÄRUNG EC-declaration of conformity Déclaration de conformité CE EG-verklaring van overeenstemming Dichiarazione CE di conformità Declaración CE de conformidad - Hiermit erklären wir, daß die Bauart von - Herewith we declare that - Par la présente, nous déclarons que - Hiermede verklaren wij, dat de in de handel gebrachte machine - Si dichiara che il modello della - Por la presente, declaramos que la 4810-95 EP: 4850-95 EP: 5221-95 EP;...
Page 49 IDEAL • Made in Germany Document Shredders Trimmers and Guillotines • • • • • IDEAL Krug & Priester 72336 Balingen Germany www.ideal.de...

This manual is also suitable for:

Ideal 6550-95ep Ideal 4850-95 Ideal 4810-95 Ideal 4850-95ep Ideal 4810-95ep