Panasonic DMP-BDT465 Operating Instructions Manual page 22

Using the Digital Media Controller
You can use a smartphone or tablet as the Digital
Media Controller (DMC) to playback contents
from DLNA server on the Renderer (this unit).
Possible applications:
Renderer
Renderer
* DMC compatible software should be installed.
Preparation
Perform steps 1 and 2. (
3 Perform the "Remote Device Settings".
( 29)
≥ With the default setting, the unit name will
be displayed in the following;
[BDT465] [BDT460]
[BDT365] [BDT364] [BDT363] [BDT361] [BDT360]
DMP-BDT360/1/3/4/5
≥ You can register up to 16 devices.
Playback
*
Server
*
Controller
Server
Controller
21)
DMP-BDT460/5
1
Press [HOME].
2
Select "Network".
3
Select "Home Network".
4
Select "Media Renderer".
5
Select "Home Network" or "Wi-Fi Direct"
and press [OK], then follow the
indications on the screen.
6
Operate the DMC compatible devices.
To exit from Media Renderer screen
Press [HOME].
About DLNA and Media Renderer
For more details, refer to the following website and the
*
operating instructions for each of the equipment.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
≥ Wi-Fi Direct connection while using Home Network feature
is only temporary, and the network connection method
returns to the original setting when exiting.
≥ Depending on the device or connection environment, the
data transfer rate may decrease.
≥ Depending on the contents and the connected equipment,
playback may not be possible.
≥ Items displayed in grey on the display cannot be played
back by this unit.
- 22 -