Funkwerk bintec R1200 User Manual
Auxiliary
Hide thumbs
Also See for bintec R1200:
- User manual (64 pages) ,
- User manual (30 pages) ,
- Manual (571 pages)
Related Manuals for Funkwerk bintec R1200
Summary of Contents for Funkwerk bintec R1200
- Page 1 User's Guide bintec R1200 / R1200w(u) / R3000 / R3000w / R3400 / R3800(wu) Auxiliary © Copyright December 12, 2006 Funkwerk Enterprise Communications GmbH Version 3.0...
- Page 2 Liability While every effort has been made to ensure the accuracy of all information in this manual, Funkwerk Enterprise Communications GmbH cannot assume liability to any party for any loss or damage caused by errors or omissions or by statements of any kind in this document and is only liable within the scope of its terms of sale and delivery.
- Page 3 Auxiliary Menu ......... . 3 Index: AUX .
- Page 4 bintec User’s Guide Auxiliary...
-
Page 5: Auxiliary Menu
Auxiliary Menu Auxiliary Menu The fields of the A menu are described below. UXILIARY R3000w Setup Tool Funkwerk Enterprise Communications GmbH [AUXILIARY]: Settings MyGateway Serial Port : none Line speed : 19200 Active Profile : Profile 1 Available Profiles: Profile 1... - Page 6 Auxiliary Menu Pin assignment of modem cable: Figure 1-1: Cable for AUX interface to the modem The configuration is set in the A menu. UXILIARY The A menu consists of the following fields: UXILIARY Field Description Serial Port Here you select which serial interface you want to use for connection to the modem.
- Page 7 Auxiliary Menu Field Description Line Speed Here you select the speed at which the gate- way addresses the modem (in bps). Possible settings: ■ default: The Baud rate of the terminal con- nection is not changed. (9600 in ex works state) All other values mean that the modem is addressed at the corresponding speed in bps.
- Page 8 Auxiliary Menu R3000w Setup Tool Funkwerk Enterprise Communications GmbH [AUXILIARY][SETUP]: Modem Configuration MyGateway Profile Configuration Incomming Dispatch Item : isdnlogin SIM card uses PIN Modem Escape Character Additional Init Sequence : ATX3 Access Point Name (APN) SAVE CANCEL The menu for the respective profile contains the following fields:...
- Page 9 Auxiliary Menu Field Description Modem Escape Charac- The value for this field is set by default to "+". It should only be changed if the escape character of the modem is different. Additional Init Sequence Here you can enter an initialization string for your modem.
- Page 10 Auxiliary Menu bintec User’s Guide Auxiliary...
- Page 11 Index: AUX Access Point Name (APN) Active profile Additional Init Sequence Analog connections Analog/GSM interface GSM modem Incoming Dispatch Item Line speed Modem Modem Escape Character Profile Profile configuration Serial port SIM card uses PIN Auxiliary bintec User’s Guide...
- Page 12 bintec User’s Guide Auxiliary...
Need help?
Do you have a question about the bintec R1200 and is the answer not in the manual?
Questions and answers