Epson Stylus Color 1520 Quick Setup Manual page 13

Windows NT 3.51
The instructions below tell you how to install the printer
software on all the Windows NT 3.51 computers that are
connected remotely to the printer via an optional network
interface card.
If you'll be connecting the printer directly to a print server and
sharing access to it on the network, see your Windows NT 3.51
documentation for printer software installation and connection
instructions.
1. Make sure Program Manager is running and the printer is
on. Exit any open application programs.
2. Insert the EPSON printer software CD-ROM.
3. From the File menu, select Run.
4. Type D:\SETUP (or substitute the correct drive letter) and
click OK.
Select Epson Stylus COLOR 1520 in the Printer Model
5.
tab and click OK.
6. Follow the instructions on the screen. Your printer is set
as the Windows default printer.
7. Follow the steps in Chapter 4 of your User's Guide to set
up your printer for network use.
To make diskette versions of the printer software on the
CD-ROM, run the MAKE_FD.EXE program on the CD-ROM and
follow the instructions on screen.
13