Getting Started - Hitachi DF2200 Owner's Manual

Getting Started

IMPORTANT! Before connecting the unit to a wall socket and turning on the
power, make sure the power cord and all connected equipment
are properly connected.
Powering the TV
To turn the power ON or OFF:
Insert the plug of the power cord into an appropriate power point and
switch on power to the outlet.
Press the POWER button at the bottom of the front panel, or on the
remote control, making sure to aim it at the sensor at the front of the TV;
the indicator will glow blue. Press it again to power off (standby mode);
the indicator will glow red.
First use
When you switch on the TV for the first time, the First Time Installation menu
will be displayed on the screen, as illustrated below.
OSD language: Use the / buttons to select your OSD language and then
use the button to go to the next item.
Country: Use the / buttons to select the country you are living in and
then use the button to go to the next item.
Auto scan: Use the / buttons to select the type of scan (ATV, DTV, DTV +
ATV) and then use the button to select Start.
Press OK to begin scanning for stations.
To exit channel tuning, press the EXIT button and use the / buttons to
select YES; select NO to continue tuning.
When auto searching is complete, your TV will show the first channel found.
15