Setting Up Ddns - KGuard Security TC801 User Manual

Note:
Obtain these information from your network administrator or your Internet Service Provider (ISP).
5
Set UPnP to On if you are using Universal Plug and Play (UPnP) devices.
Note:
If you cannot use either of the two default ports, 80 or 9000, the specified port may be occupied by other programs
or it is being blocked by your service provider. Enter other port number. In this case, you need to add the port
number after the IP address. For example, if you set the Web Port as 85, you need to enter the IP address as
"192.168.3.103:85".
6
To save, click Apply at the bottom of the screen.
« TIP »
• To revert to default settings, click Default at the bottom of the screen.
• To cancel any modifications or close the screen, click

Setting Up DDNS

DDNS (Dynamic DNS) is a service that registers a domain name and the floating IP address with a DDNS server so that
the domain name can be routed to the IP address even if the IP is changed in a dynamic IP system.
To use this feature, you must have a DDNS account. Obtain the information from your Internet Service Provider (ISP) or
create a free DDNS account with KGUARD.org server, visit the website http://www.kguard.org.
To setup DDNS, do the following:
1
On the Main Menu, click SETUP.
2
On the left panel, click Network > DDNS. The DDNS screen appears.
3
On Status, select Enable.
4
On Service, select the DDNS server.
5
On Host Name, enter the domain name.
6
Enter the User Name and Password.
7
Click Apply at the bottom of the screen.
« TIP »
• To revert to default settings, click Default at the bottom of the screen.
• To cancel any modifications or close the screen, click
Chapter 5: KGUARD Web Client
.
.
DVR User's Manual
73