Specifications; Appendix A - CTC Union I-DSL64 User Manual

I-DSL64 USER'S MANUAL

Specifications:

Items
Line coding
Network
Line
Surge Protection Meets FCC Part 68 Type A，B
Interface
Number of Ports 1
DTE
Interface
Operation Range
Clock Source
Diagnostic
Front Panel
Power
Consumption
Dimensions
Physical
Temperature
Environment
EMI

Appendix A

Type Full duplex with adaptive echo cancellation
2B1Q
Line Type Unconditioned twisted pair， 19-26 AWG
Connector RJ45
Data Rate Synchronous : 64Kbps
Connector G.703 64K Co-Directional 4-wire twisted pair
2-wire mode
Up to 5.5Km over 26 AWG
Up to 7.0Km over 24 AWG
Meet ANSI T1.601 and ETSI ETR 080 standard loop
Internal
Line
G64KC
eoc Fully detect EOC message defined by ANSI T1.601
Local loopback
Digital loopback
Loopbacks ITU-T V.54 DTE loopback
ANSI T1.601 CSU loopback
2047 BERT DTE-(G64KC)
4 operation keys ( Esc, Left arrow, Right arrow,
Keypad
Enter)
7 status LED's
LED
PWR, SYNC, Loop, BERT, Data[Tx, Rx, ERR]
LCD 16 X 2 with backlight
AC Input 90~264VAC, 47~63Hz
DC Input 18~60VDC
>10VA
19.5X4.8X16.8 cm (W X H X D)
Mounting Desk-top stackable
0~50℃
Humidity 0%~95%RH (non-condensing)
Meets IEC CISPR22 Class A
Meets FCC Part 15 Subpart B Class A
Notes
30