Do you have a question about the HRS-8 and is the answer not in the manual?
Questions and answers
Harman
March 18, 2025
sunfire subwoofer hrs8 has no power or the light doesn’t turn on or glow after plugging in, checked the fuse and the power cable and it appears to be fine.
What do I do next?
1 comments:
Mr. Anderson
March 18, 2025
If your Sunfire HRS-8 subwoofer has no power and the light does not turn on after checking the fuse and power cable, follow these steps:
1. Ensure Proper Power Connection – Verify that the subwoofer is plugged into a working power outlet. Try a different outlet to rule out electrical issues. 2. Check the Power Requirements – The subwoofer requires 100V 50Hz, 120V 60Hz, or 220V 50/60Hz. Ensure your power source matches these specifications. 3. Inspect the Fuse Again – Even if checked, ensure the fuse is intact and properly seated. 4. Disconnect All Other Connections – Remove all cables except the power cord and check if the subwoofer turns on. 5. Try a Different Power Cord – If possible, use another compatible 15-amp extension cord with a ground connection. 6. Contact Sunfire Support – If the subwoofer still does not power on, it may require service. Reach out to Sunfire for further troubleshooting or repair authorization.
If none of these steps resolve the issue, the subwoofer may need professional repair.
Need help?
Do you have a question about the HRS-8 and is the answer not in the manual?
Questions and answers
sunfire subwoofer hrs8 has no power or the light doesn’t turn on or glow after plugging in, checked the fuse and the power cable and it appears to be fine. What do I do next?
If your Sunfire HRS-8 subwoofer has no power and the light does not turn on after checking the fuse and power cable, follow these steps:
1. Ensure Proper Power Connection – Verify that the subwoofer is plugged into a working power outlet. Try a different outlet to rule out electrical issues.
2. Check the Power Requirements – The subwoofer requires 100V 50Hz, 120V 60Hz, or 220V 50/60Hz. Ensure your power source matches these specifications.
3. Inspect the Fuse Again – Even if checked, ensure the fuse is intact and properly seated.
4. Disconnect All Other Connections – Remove all cables except the power cord and check if the subwoofer turns on.
5. Try a Different Power Cord – If possible, use another compatible 15-amp extension cord with a ground connection.
6. Contact Sunfire Support – If the subwoofer still does not power on, it may require service. Reach out to Sunfire for further troubleshooting or repair authorization.
If none of these steps resolve the issue, the subwoofer may need professional repair.
This answer is automatically generated