Bosch EX49N Installation Instructions Manual page 16

 Secure all cabling.
 Camera has been evaluated for wall/ceiling
mounting using #8 1¼" long, 12 TPI, wood
screws with Robertson heads secured into a 2x4
stud under ½" drywall
Camera has not been evaluated for safety
requirements using other mounting kits.
The mounting holes are configured for a single-gang
electrical box or a round ceiling electrical box. The
camera base can also be mounted to any flat
surface. See the template on page 23.
It would be advantageous if the power and video
wires from the remote source could be routed into
the electrical box at this time.
Step 3.1 - Connect the cables coming out of the
camera to the power and video cables that
are routed from their remote location into
the electrical box or equivalent.
Step 3.2 - Mount the camera housing to the electrical
box or surface. (Screws are not supplied).
Refer to Figure 3-1 on page 11.
10