Insignia NS-WHP314 2.4 GHz Digital Wireless Stereo Headphones Safety information Warning To reduce the risk of fire or electric shock, do not expose this system to rain or moisture Caution To reduce the risk of electric shock, do not remove screws, covers, or the cabinet.
Insignia NS-WHP314 2.4 GHz Digital Wireless Stereo Headphones • Batteries (battery pack and batteries installed) should not be exposed to excessive heat such as sunshine or fire. • Do not place any conductive material in the cradle to avoid short circuits involving the charging pins.
Insignia NS-WHP314 2.4 GHz Digital Wireless Stereo Headphones Headphones Item Description Headphone (power) switch (on right earpiece). Press and release to turn the headphones on. Press and hold (more than two seconds) to turn the headphones off. Volume Up (+) button. Press to increase the volume.
Page 6
Insignia NS-WHP314 2.4 GHz Digital Wireless Stereo Headphones Docking station top Item Description Align this arrow with the arrow on the headphones to charge your headphones. Charging indicator: • Turns red when the headphones are charging. • Turns green when the headphones are charged.
Insignia NS-WHP314 2.4 GHz Digital Wireless Stereo Headphones Docking station back Item Description INPUT jacks (L and R). Connect a TV or other sound source to these jacks. OUTPUT jacks (L and R). Optional. Can be used if you need to connect this device to a stereo system or other audio device.
Insignia NS-WHP314 2.4 GHz Digital Wireless Stereo Headphones Setting up your system Connecting the headphones Caution To prevent damage to your system, make sure that all components are turned off before making the connections. The following diagram shows a typical user installation. In this example the docking station is connected to the audio output of a TV and the audio input of a stereo system (optional).
Page 9
Insignia NS-WHP314 2.4 GHz Digital Wireless Stereo Headphones Connecting the AC adapter to the docking station Cautions • To avoid risk of fire and to prevent damage, only use the AC adapter supplied with your wireless headphones. Make sure that the AC power outlet matches the AC adapter’s 100-240V before making the connection.
Insignia NS-WHP314 2.4 GHz Digital Wireless Stereo Headphones Using your system Charging the headphones Important Before using the wireless headphones for the first time, make sure that the batteries are fully charged, which can take up to four hours. To charge the headphones: 1 Slide the OFF/ON switch on the docking station to ON.
Insignia NS-WHP314 2.4 GHz Digital Wireless Stereo Headphones • When the headphone battery charge is low, the Power/Pairing indicator on the headphones blinks red. The Power/Pairing indicator on the headphones turns red 30 minutes prior to the batteries being exhausted.
Insignia NS-WHP314 2.4 GHz Digital Wireless Stereo Headphones Note If the charge on the headphone batteries is low, the Power/ Pairing indicator on the headphones blinks red. When this happens, you should charge the headphones. For instructions, see “Charging the headphones“ on page 10.
Insignia NS-WHP314 2.4 GHz Digital Wireless Stereo Headphones Turning off the system To turn off the system: 1 Press and hold (more than two seconds) the (power) switch located on the headphones’ right earpiece to turn off the headphones. 2 Slide the OFF/ON switch on the docking station to OFF to turn off the system.
Insignia NS-WHP314 2.4 GHz Digital Wireless Stereo Headphones Problem Solution There is sound interference • Move the docking station slowly to find the best reception position for your headphones. • Shorten the distance between your headphones and the docking station. The maximum distance is 45 feet (15 m), but walls and other obstructions will limit this distance.
Page 15
Insignia NS-WHP314 2.4 GHz Digital Wireless Stereo Headphones This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Product is determined to be defective by an authorized Insignia repair center or store personnel, Insignia will (at its sole option): (1) repair the Product with new or rebuilt parts; or (2) replace the Product at no charge with new or rebuilt comparable products or parts.
Page 18
Damage due to incorrect operation or maintenance • Connection to an incorrect voltage or power supply • Attempted repair by any person not authorized by Insignia to service the Product • Products sold “as is” or “with all faults” •...
Need help?
Do you have a question about the NS-WHP314 and is the answer not in the manual?
Questions and answers
How to replace batteries in Head phones model NS-WHP314