Operating Instructions High Definition Video Camera HDC-SD20 Model No. HDC-TM20 HDC-HS20 Before use, please read these instructions completely. Please also refer to Operating Instructions (PDF format) recorded on the CD- ROM containing the Operating Instructions (supplied). You can learn about advanced operation methods and check the Troubleshooting.
Information for Your Safety WARNING: The socket outlet shall be installed near the equipment and easily accessible. TO REDUCE THE RISK OF FIRE, The mains plug of the power supply cord shall ELECTRIC SHOCK OR PRODUCT remain readily operable. DAMAGE, To completely disconnect this apparatus from ≥...
∫ Caution for use ∫ Information for Users on Keep the High Definition Video Camera as far Collection and Disposal of Old away as possible from electromagnetic Equipment and used Batteries equipment (such as microwave ovens, TVs, These symbols on the products, video games etc.).
Page 4
≥ “AVCHD” and the “AVCHD” Logo are provide AVC Video. No license is granted or shall trademarks of Panasonic Corporation and be implied for any other use. Additional Sony Corporation. information may be obtained from MPEG LA, ≥...
[HDC-TM20] .......... 7 With a TV Handling of HDD [HDC-HS20]....8 [1] Watching Video/Pictures [2] Parts identification and handling ..9 on your TV ......... 42 [HDC-SD20/HDC-TM20] ....... 9 [HDC-HS20]......... 12 Others Setup Reading the Operating Instructions [1] Power supply ........15 (PDF format)..........
Accessories Check the accessories before using this unit. Optional accessories Battery pack Some optional accessories may not be available VW-VBG070 in some countries. AC adaptor AC adaptor (VW-AD21E-K) VSK0698 Battery pack (lithium/VW-VBG070) Battery pack (lithium/VW-VBG130) AC cable K2CQ2CA00006 Battery pack (lithium/VW-VBG260) Battery pack (lithium/VW-VBG6) DC cable Battery pack holder kit (VW-VH04)
Indemnity about recorded content Panasonic does not accept any responsibility for damages directly or indirectly due to any type of problems that result in loss of recording or edited content, and does not guarantee any content if recording or editing does not work properly. Likewise, the above also applies in a case where any type of repair is made to the unit (including any other non-built-in memory/HDD related component).
Handling of HDD [HDC-HS20] ∫ Do not expose the HDD to state is detected repeatedly, the unit may stop the recording or playback operation in order to vibrations and shocks. protect the HDD. Due to the environment and handling conditions, ∫...
DC input terminal [DC IN] ≥ Always use the supplied AC adaptor or a ≥ It can rotate up to 180o A towards the lens or genuine Panasonic AC adaptor (VW-AD21E-K; 90o B towards the opposite direction. optional). 10 USB terminal [...
Page 10
13 SD card open lever [OPEN] Be careful about the following. 14 Audio-video output terminal [A/V] When 2 lens accessories, such as the ND filter ≥ Use the AV cable (only the supplied cable). and tele conversion lens, are fitted and the 15 Component terminal [COMPONENT] zoom lever is pressed toward the W side, the 16 HDMI mini connector [HDMI]...
Page 11
26 Recording start/stop button 35 Tripod receptacle 27 Status indicator This is a hole for attaching the unit to the optional 28 Mode switch tripod. (For details on mounting the tripod, refer 29 Photoshot button [ to the operating instructions for the tripod.) 30 Zoom lever [W/T] (In recording mode) Thumbnail display switch/Volume lever /VOLr] (In playback mode)
Battery holder DC input terminal [DC IN] ≥ It can open up to 90o. ≥ Always use the supplied AC adaptor or a genuine Panasonic AC adaptor (VW-AD21E-K; optional). 10 USB terminal [ 11 Menu button [MENU] 12 Delete button [...
Page 13
Attaching the lens cap (Included in the Filter Kit (VW-LF43NE; optional)) ≥ When the filter kit (VW-LF43NE; optional) is used, protect the lens surface while the unit is not used with the lens cap supplied with the filter kit. 20 Built-in flash 21 Lens (LEICA DICOMAR) Lens cover A ≥...
Page 14
26 Recording start/stop button 36 Tripod receptacle 27 Status indicator This is a hole for attaching the unit to the optional 28 Mode dial tripod. (For details on mounting the tripod, refer 29 HDD access lamp [ACCESS HDD] to the operating instructions for the tripod.) 30 Photoshot button [ 31 Zoom lever [W/T] (In recording mode) Thumbnail display switch/Volume lever...
Please be advised that we are not liable for any accident or failure occurring as a result of use of a counterfeit battery pack. To ensure that safe products are used we would recommend that a genuine Panasonic battery pack is used. Charging the battery When this unit is purchased, the battery is not charged.
≥ We recommend using Panasonic batteries (l 6, 17, 18). ≥ If you use other batteries, we cannot guarantee the quality of this product. ≥ Do not heat or expose to flame. ≥ Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with doors and windows closed.
Charging and recording time ∫ Charging/Recording time ≥ Temperature: 25 oC/humidity: 60% HDC-SD20 Battery model number Maximum continuously Actual recordable [Voltage/Capacity Charging time recordable time time (minimum)] Supplied battery/ VW-VBG070 (optional) 1 h 35 min 1 h 20 min 50 min [7.2 V/725 mAh]...
Page 18
( ) will flash. ≥ The remaining battery capacity is displayed when using the Panasonic battery that you can use for this unit. It may take time to display the remaining battery capacity. The actual time can vary depending on your actual use.
Connecting to the AC outlet The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet. Important: While the DC cable is connected to the AC adaptor, the battery will not charge. ≥...
Use SD cards conforming to Class 4 or higher of the SD Speed Class Rating for motion picture recording. Motion picture recording Still picture Card type Capacity The following models of Panasonic SD cards can be recording used. 8 MB Cannot be used. Can be used. 16 MB 32 MB Cannot be guaranteed in operation.
Inserting/removing an SD card When using an SD card not from Panasonic, or one previously used on other equipment, for the first time on this unit, format the SD card. (l 41) When the SD card is formatted, all of the recorded data is deleted.
Change the mode to recording, playback or power OFF. Turn on the power by changing the mode to while pressing the lock release button A. HDC-SD20 HDC-HS20 HDC-TM20 ≥ Operate the mode switch while at the same ≥ Rotate the mode dial while at the same...
When the mode is set to , power is turned on when the LCD monitor is opened, and power is turned off when it is closed. ∫ To turn on the power HDC-SD20 HDC-HS20 HDC-TM20 A The status indicator lights.
Preparation How to use the touch screen Setup You can operate by directly touching the LCD monitor (touch screen) with your finger. It is easier to use the stylus pen (supplied) for detailed operation or if it is hard to operate with your fingers. ∫...
Preparation Using the menu screen Setup Touch the desired item to enter MENU the setting. Press the MENU button. Touch [EXIT] or press the MENU button to exit the menu setting. MENU ∫ About information display setting Touch the top menu A. An explanation or setting confirmation message of the submenu or item being touched gets displayed in step 3 and 4.
Preparation Setting date and time Setup When the unit is turned on for the first time, a Changing the date and time display mode message asking you to set the date and time will Select the menu. (l 25) appear. [SETUP] # [DATE/TIME] # desired display Select [YES] and perform steps 2 to 3 below to style...
Recording Before recording Recording Intelligent auto mode The following modes appropriate for the Mode Scene/Effect condition are set just by pointing the unit to what Low light Dark room or you want to record. twilight ≥ When this unit is purchased, the Intelligent auto mode is set to on.
∫ When selecting media Select the menu. (l 25) [MEDIA SELECT] # [Built-in Memory] or [SD CARD] [MEDIA SELECT] # [HDD] or [SD CARD] HDC-SD20 HDC-HS20 HDC-TM20 ≥ Operate the mode switch while at the same ≥ Rotate the mode dial while at the same...
Press the recording start/stop Press the recording start/stop button to start recording. button again to pause recording. ≥ While recording is in progress, the recording will not stop even if the LCD monitor is closed. About the compatibility of the recorded motion pictures ≥...
Recording The number of pixels recorded for still pictures is [ 1920k1080] (16:9). Still pictures can also be recorded while recording motion pictures. HDC-SD20 HDC-HS20 HDC-TM20 ≥ Operate the mode switch while at the same ≥ Rotate the mode dial while at the same...
Page 31
Focus indication: ∫ About the focus indication ≥ The focus indication indicates the status of the auto focus. ≥ The focus indication will not be displayed in the following conditions. jWhen the manual focus is used. jWhen the colour night view function is used. A Focus indication ≥...
Recording Zoom in/out function Recording The maximum optical zoom ratio is 16k. Digital zoom function ¬ Change the mode to / VOL If the zoom magnification exceeds 16k, then the digital zoom function will be activated. Select the menu. (l 25) [RECORD SETUP] # [D.ZOOM] # desired setting [OFF]:...
Recording Optical image stabilizer Recording function Optical image stabilizer can stabilize the image without decreasing the image quality as much. ¬ Change the mode to O.I.S. Optical image stabilizer button Press this button to switch on/off the image stabilizer function. appears on the screen.
Playback Motion picture playback Playback HDC-SD20 HDC-HS20 HDC-TM20 ≥ Operate the mode switch while at the same ≥ Rotate the mode dial while at the same time pressing in the lock release button if time pressing in the lock release button if changing from OFF to another mode.
Page 35
∫ Fast forward/rewind playback Select the playback operation by Touch 5 during playback to fast forward. (Touch 6 to rewind.) touching the operation icon. 0h00m00s 0h00m00s 0h00m00s ≥ The fast forward/rewind speed increases if you 1/;: Playback/Pause touch 5/6 again. (The display on the Rewind playback screen changes from 5 to Fast forward playback...
∫ Frame-by-frame playback Motion picture compatibility The motion picture is advanced one frame at a ≥ This unit is based on the AVCHD format. time. ≥ The video signal that can be played back on Pause the playback. this unit is 1920k1080/50i or 1440k1080/ ≥...
Playback Still picture playback Playback HDC-SD20 HDC-HS20 HDC-TM20 ≥ Operate the mode switch while at the same ≥ Rotate the mode dial while at the same time pressing in the lock release button if time pressing in the lock release button if changing from OFF to another mode.
≥ Any still pictures where the thumbnails are Select the playback operation by displayed as cannot be played back. touching the operation icon. ≥ During still picture playback, the power will not turn off even if the LCD monitor is closed. 1/;: Slide show (playback of the still pictures in numerical order) start/pause.
Playback Deleting scenes/still pictures Editing Deleted scenes/still pictures cannot be restored, so perform appropriate confirmation of the contents before proceeding with delete. ¬ Change the mode to To delete by confirming images being played back Press the button while scenes or 0h00m00s 0h00m00s 0h00m00s...
Page 40
(Only when [SELECT] is selected in step 2) To continue deleting other scenes Repeat steps 3-4. When you stop deleting halfway Touch [CANCEL] or press the MENU button while deleting. ≥ The scenes or still pictures that have already been deleted when the deletion is cancelled cannot be restored.
Playback Formatting Editing Please be aware that if a medium is formatted, then all the data recorded on the medium will be erased and cannot be restored. Back up important data on a PC, DVD disc etc. ¬ Change the mode to , and select desired media to be formatted.
2 HDMI terminal 3 Component terminal 4 Video terminal ≥ Use the supplied component cable and AV cable. Use of the following Panasonic HDMI mini cables is recommended to connect the unit to the HDMI terminal. Connect this unit to a TV.
Page 43
≥ Check that the plugs are inserted as far as they go. ≥ Do not use any other cables except a genuine Panasonic HDMI mini cables (RP-CDHM15, RP-CDHM30; optional). ≥ Do not use any other component cables except the supplied one.
∫ For Windows (PDF format) Delete the PDF file from the “Program Turn the PC on and insert the CD- Files\Panasonic\HDC\” folder. ROM containing the Operating ≥ When the contents in the Program Files folder Instructions (supplied). cannot be displayed, click the [Show the contents of this folder] to display them.
Power source: DC 9.3 V (When using AC adaptor) DC 7.2 V (When using battery) Power consumption: Recording: 5.6 W 5.7 W 6.6 W HDC-SD20 HDC-TM20 HDC-HS20 Signal system 1080/50i Recording format AVCHD format compliant Image sensor 1/6z 1MOS image sensor...
Page 48
Panasonic Corporation Web site: http://panasonic.net Pursuant to at the directive 2004/108/EC, article 9(2) Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany...
Need help?
Do you have a question about the HDC-SD20 and is the answer not in the manual?
Questions and answers