When the VCR is turned on for the first time or after exhaustion of the battery, initial clock set
up is needed. Without inputting the clock data, the time to be recorded on the recorded
pictures will not match with the time of the incidents. Therefore make sure that you fill out
correctly before exiting menu.
By pressing SELECT key, date format change like following order.
MM/DD
• MM/DD, DD/MM : field conuter display (record screenn)
• MM/DD/YY, DD/MM/YY : year display (record screen)
MENU OPERATION
English-10
SETTING THE CLOCK ( INITIAL CLOCK SETTING )
FORMAT
DATE
TIME
PROGRAMMING
ELAPSED USE TIME
[
DD/MM
MM/DD/YY
1. Press MENU button.
2. Press MOVE to shift the cursor (
3. Press SELECT to select or adjust the default value, and when having a following
informative page, it enters into the next mode.
4. Press SPEED(-) or SPEED(+) to adjust the cursor value.
5. Press MENU to exit the OSD mode.
CLOCK / TIMER
MM / DD
-- / -- / [----]
-- : -- : --
] [
]
[MENU] EXIT
DATE FORMAT
DD/MM/YY
SETTING THE MENUS
) downward.
0000H