Changing Oil - Powerhouse PH2100PRi Operating Instructions Manual

6.3 Changing oil

Drain the oil while the engine is still warm to assure rapid and complete draining.
1. Loosen the cover screw and remove the side maintenance cover.
2. Remove the oil filler cap.
3. Install the oil drain pipe.
4. Drain dirty oil into a container thoroughly.
5. Refill with the recommended oil, and check the oil level.
6. Reinstall the maintenance cover and tighten the screw securely.
Engine oil capacity: 15.2 oz. (0.45L)
Drain
Pipe
■ Make sure to turn the engine switch and the fuel cap vent lever OFF before
draining.
Dip Stick
■ Please dispose of used motor oil in a manner that is compatible with the
environment and local disposal regulations. Do not throw it in the trash or pour it
on the ground.
31
Upper Level
Oil Fill Hole
Upper Level
Lower Level
PH2100PRi OM revision 2010-10-07