To Set Clock; To Use Child Safety Lock - Panasonic NN-SD691S Operation And Cooking Manual

Inverter microwave oven household use only
Hide thumbs Also See for NN-SD691S:
Table of Contents

Advertisement

To Set Clock

You can use the oven without setting the clock.
1
Press
Colon will blink in Display Window.
2
Enter Time of Day
Enter time of day using Time Dial e.g. 12:35
Clock is a 12 hour display. There isn't a.m. or p.m. setting.
Time appears in the Display Window, colon is blinking. Verify time of day in the Display Window.
Note:
Turning the dial slowly will count up in 1 minute steps. Turning the dial quickly will count up in 10 minute
steps.
3
Press
Colon stops blinking; time of day is entered and locked into Display Window.
NOTES: 1. Oven will not operate while colon is still blinking.
2. To reset time of day, repeat step 1 through 3.
3. The clock will keep the time of day as long as oven is plugged in and electricity is supplied.
4. Maximum time available is 12:59. Clock is 12 hour only. One o'clock will be displayed as 1:00
not 13:00.

To Use Child Safety Lock

This feature allows you to prevent operation of the oven by a young child; however, the door will open.
You can set Child Safety Lock when colon or time of day is displayed.
To set
or
Colon or time of day is displayed
To cancel
Display Window
NOTE: To set or cancel child safety lock, Start pad or Stop/Reset pad must be pressed 3 times within 10
seconds.
Press 3 times.
Press 3 times.
– 10 –
Display Window
or
Colon or time of day is displayed

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NN-SD691S and is the answer not in the manual?

Questions and answers

L M Jones
March 6, 2025

I can't open the door. I'm hoping it's not broken. Is there anything I could check please? Thank you

1 comments:
Mr. Anderson
March 6, 2025

If the door on your Panasonic NN-SD691S microwave is stuck and won't open, follow these steps to troubleshoot:

1. Check the Door Latch – A broken door latch can cause the issue. If the latch is damaged, it may need replacement.
2. Inspect for Obstructions – Ensure no food debris or foreign objects are blocking the door mechanism.
3. Power Cycle the Microwave – Unplug the unit for a few minutes and then plug it back in to reset any electronic locks.
4. Look for Error Messages – If the display shows error codes like "h00," "h97," or "h98," it may indicate a microwave production issue, requiring professional service.
5. Replace the Door if Necessary – If the latch is broken and the light remains stuck on, replacing the door (part number F82569Y00AP) may be required.

If the issue persists, contact an authorized Panasonic service center.

This answer is automatically generated

This manual is also suitable for:

Nn-gd682s

Table of Contents